Silicone Injection Machine Manufacturing Machine Silicone Molding Machine For Lady Silicone Menstrual Cup​

Machine Type:

• Easy operation and repair

• The vulcanizing machine is mainly use to produce rubber pads, Each working layer equipped with two sets moulds, it can take turn vulcanization. Thereby improve production efficiency

• The center distance in certain, allowed to install large diameter of hydraulic cylinder, which can reduce the hydraulic cylinder the amount, and the simple structure, maintenance is less.

• The beam in the section of force is reasonable, the modulus needed than live in small, can reduce weight

• Manufacturing installation is simple, pipe configuration, whole hidden appearance tidy and beautiful. Box type flat-band plate vulcanizing machine single box board the lateral stiffness ratio of the poor, but because the mast frame type flat-band plate vulcanizing

Applications :

• "all-in-out" series silicone rubber injection molding machine is advanced rubber molding technology, it's structure is compact with wide applicability, high efficiency and high quanlity.

• Especially it is suitable for the rubber products of complex shapes, exhausting difficultly, difficult to molding, and need high precision injection.

Own Patented "all-in-out" Technology:

1. Visible Feeding System:

• Avoid the traditional techniques which cannot know about the situations like temperature/hardness/ Plasticizing before vulcanizing,
• Efficiently get control of the raw material Plasticizing status, can make adjustment in time.

2. Excellent Plasticizing Effects:

• Excellent Plasticizing effects, reduce the waste rubber material, avoid blocking the cylinder, save much more raw material when plasticizing.
• Easy to switch the different colors of raw material,easy for cleaning.

3. High Temperature Ranges:

• Simple structure, Plasticizing temperature between 90 ℃ and 100 ℃, ensure good Plasticizing effects.
• Good Plasticizing effects can ensure a good injection products.

4. Save Raw Rubber Material:

• Can handle with the raw rubber material as hardness as 85°.
• Improve coefficient of utilization of raw material.

5. all material in, and all out:

• ​All-in-out structure, sprueless injection without material loss controlable injecting material temperature
• Excellent for high precision molding parts

Specific Charateristics:

1. Suitable for automotive and electronic rubber parts, high / cold temprature precision rubber parts, especially NBR products.

2. All-in-out structure, sprueless injection without material loss controlable injecting material temperature.

3. Excellent for high precision molding part

4. 5-10 times better accuracy than conventional injection machine the measuring precision of 1000cc injection volume is up to ±0.1g

5. Anti-collision molding system prevent mold damage occurring from misalignment(patented)

6. Servo-controlled system up to 40% energy saving

7. Proportional backpressure controlling characteristic

Services Conception:

• Installation and debugging: Our engineers will teach you about the installation and debugging for free.

• Technology training : Our company will offer technology training for your operation.

• After-sales service: We will supply the free repairment on this machine for one year, but will supply the maintenance lifetime. ( the service is only for natural damage)

Main Technical Parameters:

Images Showcaes: