Color Coating Carbide Welding Rod For Petroleum Industry Application

Carbide Welding Rod Introduction:

Carbide Welding Rod is made of cemented carbide/crushed carbide and Ni/Ag(Cu) alloy. The cemented carbide/crushed carbide with sharp edged has excellent wear resistance and cutting ability. According to different working conditions, both sharp edged and dull edged carbide are used, the former is used to cut rocks and drop out bits, while the latter is used in places where excellent wear resistance is required, such as centralizer. The coating provides an outstanding cutting property and wear resistance. Typically used in down hole tools, such as reamer, hole opener, milling tools, fishing tools and centralizer.

YD type Carbide Welding Rod is made of a mixture of granular sintered cemented carbide and elasticized carcass alloy.A special layer of flux is applied and colored to identify the particle size. The sintered cemented carbide particles are mainly cobalt-containing tungsten carbide, and its hardness is HRA89-91; the carcass metal is "nickel-copper"alloy, the tensile strength is 690 MPa, and the hardness is HB2160.

Carbide Welding Rod Grade

Carbide Welding Rod Application

Carbide Welding Rod is widely used, which can realize a variety of materials, profiles and joints in a variety of forms of welding.

1. The welding of butt joint, corner joint, lap joint, t-joint and other joint forms can be realized.
2. It is suitable for flat welding.
3. it can surfacing welding on the parts with wear and other failure, so as to get the surface surfacing layer with shallow melting, flat surface and excellent performance.
4. It can be achieved without groove 1 ~ 6mm thick metal sheet single welding double molding.

Q&A

Q1: Are you a factory or a trading company?

A: We are a factory. We have been focusing on Tungsten Carbide for over 20 years.

Q2:What is your principle for the samples?

A: We offer free samples if you are willing to pay the freight.

Q3:What is your delivery time?

A: Generally it is 5 to 7 days if your required goods are in stock, otherwise it takes 20 to 30 days when there is no stock.

Q4:Do you have any test reports or certificates?

A: Yes, we can offer certificate of ISO9000:2008, we also report our test results for your reference.

Q5: Do you provide after-sale service?

A: Yes. So if you find any problem after using our cutting tools, please do not hesitate to tell us, we’ll help you to solve it as soon as possible. Your any feedback to products is our way to improvement

Packaging & Delivery:

Packing Details:

Plastic Boxes Inside and Cartons Outside