300mW 10km Drone Video Data Link Network
This advanced drone video data link supports star networking architecture, providing reliable wireless communication channels for control and telemetry within the 1.4 MHz to 1.5 GHz frequency range.
Key Features
- TDD OFDM Modulation Technology
- Maximum 30Mbps throughput @20MHz bandwidth
- Web UI or Serial UART for system management
- Dual Ethernet ports with 3-channel serial data transmission
- Uplink and downlink data stream control capabilities
Technical Specifications
| Model Number | HCL536-300mW |
| Modulation | TDD OFDM |
| Frequency Range | 806~826MHz, 1428~1468MHz, 1420~1530MHz |
| FHSS Support | Yes |
| Bandwidth Options | 1.4/3/5/10/20MHz |
| Maximum Throughput | 30Mbps @20MHz |
| RF Transmission Power | 300mW |
| Constellation | QPSK, 16QAM, 64QAM self-adaption |
| Sensitivity | -108dBm (1Mbps) |
| Ethernet Ports | 2 * Ethernet ports |
| Serial Ports | 3 channels (3*RS232, 3*TTL or 2*RS232/TTL + 1*Sbus) |
| Transmission Range | 10km (UAV to Ground) |
| Management Interface | Web UI and Control UART |
| Encryption | AES128 |
| Networking Mode | Point to Point, Point to Multipoint, Relay, Mesh |
| Movement Speed Support | ≥300km/h |
| Power Input | 12~18V |
| Dimensions | 103.4 * 61.4 * 22mm |
| Weight | 142g |
Input/Output Connections
| Ethernet 1 | 4Pin ZH1.5mm connector, bridged with Ethernet2 |
| Ethernet 2 | RJ45 connector, bridged with Ethernet1 |
| UART * 3 | 3Pin GH1.25mm lockable connector * 3, 3 channel UART, RS232/TTL/Sbus optional |
| Power Input | XT30PW-M connector |
| ANT 1 | Tx/Rx Antenna port, SMA female |
| ANT 2 | Rx Antenna port, SMA female |
The HCL536-300mW video data link supports two operating modes: Access Node or Central Node. This web-controlled wireless video transmitter supports up to 16 Access Nodes connected to one Central Node, with all nodes sharing the entire transmission bandwidth (maximum 30 Mbps @ 20 MHz throughput). The system allows control of uplink and downlink data stream ratios through the Web UI interface.
Frequently Asked Questions
Q1. This video data link supports IP cameras. What if I want HDMI or SDI video input?
The default video input is through the IP RJ45 Ethernet port. For cameras with HDMI, SDI, AHD, or AV output, we recommend using our mini encoder device to encode the video/audio signals into digital data for transmission. At the receiver end, you can connect directly to your computer or NVR. For HDMI monitor output, our decoder device converts the digital data back into HDMI video and audio signals.
Q2. For the 800MHz and 1.4G bands, which one would be better?
If your local area has DVB-T or DVB-T2 digital television signals in the 170-860MHz range, the 1.4G band would be preferable. Additionally, since GPS antennas on drones point upward and transmitter antennas point downward, the 1.4G frequency has negligible effect on GPS signal reception.
About Hincn Limited
Hincn Limited is a Hong Kong company specializing in HD video wireless communication solutions, founded in 2018. Our research and production center is located in Shenzhen and was established in 2015. With a team of 13 employees, including 3 programmers and 2 engineers, we maintain long-term cooperative relationships with industry leaders ADI, Xilinx, Altera, and Morningcore. We serve as a third-party design partner for both ADI and Morningcore.