20W UAV Data Link Mesh Data Telemetry Radio Link For Drone Swarm Communication
Product Attributes
| Air-to-ground LOS (line of sight) distance |
≥300km |
| High sensitivity |
-114dBm@125kHz |
| RF Power |
20W(43dBm) |
| Encryption |
128-bit encryption |
| Size |
82.5*52*16mm |
| Customization |
Support |
Key Features
- Supports up to 735kbps wireless link rate
- Supports Point-to-Point, Point-to-Multipoint, Multipoint-to-Point and Mesh topologies
- Supports maximum 1024 nodes mesh network
- High sensitivity: -114dBm at 125kHz bandwidth
- Supports frequency hopping (FHSS)
- Air-to-ground UAV LOS transmission distance: ≥300km
HNC1 Mesh Network UAV Data Link Overview
The HNC1 wireless mesh drone data link enables long-distance, decentralized communication among a large number of nodes. All nodes can communicate independently without interfering with each other.
- Support large-scale dense node access for wireless transmission, dynamic network establishment, and flexible reconfiguration
- Support full multiplexing communication - the node can send data while also receiving data from all other nodes without mutual interference
- Capable of achieving interoperability between any node in the network and all other nodes, even without a central node
Applications
HNC1 UAV data link mesh radio supports large-scale node access, multi-hop self-organizing network, which can be used for:
- Swarming drones
- Internet of Things
- Data link
- Remote control
- Data collection
- Artificial intelligence
- equipment
HNC1 20W Data Link Mesh Radio Models
| Model |
RF Power |
Network Scale |
Frequency Bands |
| HNC1-H800-20W |
20W |
Max. 1024 nodes, up to 16 hops |
820~854MHz |
| HNC1-H900-20W |
20W |
Max. 1024 nodes, up to 16 hops |
900~940MHz |
| HNC1-F800-20W |
20W |
Max. 256 nodes, up to 3 hops |
820~854MHz |
| HNC1-F900-20W |
20W |
Max. 256 nodes, up to 3 hops |
900~940MHz |
Technical Specifications
| Frequency |
Different models support different frequency bands (see models table above) |
| Bandwidths |
1MHz/500kHz/250kHz/125kHz selectable |
| Frequency hopping speed |
- 1MHz: Over 1800 times per second
- 500kHz: Over 900 times per second
- 250kHz: Over 450 times per second
- 125kHz: Over 225 times per second
|
| Effective data rate |
- 1MHz: Up to 735kbps
- 500kHz: Up to 370kbps
- 250kHz: Up to 185kbps
- 125kHz: Up to 92kbps
|
| Full-multiplexing communication |
Support |
| Air-to-ground LOS distance |
≥300km |
| Centerless self-organized network |
Support centerless self-organized network, any node of the network is destroyed without affecting the communication |
| Network construction time |
Within 1 second |
| Wireless transmission delay |
Minimum 2ms |
| Dynamic topology |
Support dynamic topology, support node joining and leaving, network topology change and deformation can be normal communication |
| RF power |
20W(43dBm) |
| Sensitivity |
- 125kHz: -114dBm
- 250kHz: -111dBm
- 500kHz: -108dBm
- 1MHz: -105dBm
|
| Frequency stability |
≤1ppm |
| Modulation |
QPSK modulation LDPC coding |
| Encryption |
128-bit encryption |
| Low power consumption (varies by data rate) |
Less than 1.5W(0.06A/24V) when receiving, transmission power consumption (B is in bytes):
- 1.2KB/s: 2.4W(0.1A@24V)
- 3.4KB/s: 3.9W(0.16A@24V)
- 6.4KB/s: 5.5W(0.23A@24V)
- 12KB/s: 9.6W(0.4A@24V)
- 26KB/s: 19.2W(0.8A@24V)
- 37KB/s: 24W(1A@24V)
- 48KB/s: 32W(1.35A@24V)
|
| Operating voltage |
24V as default, supports a wide voltage input of 7-36V. Transmission power varies with voltage:
- 7V: 2W
- 12V: 5W
- 18V: 10W
- 24V: 20W
- 20-36V: 20W-30W
- Power supply capacity requirement: ≥2.5A @ 24V (20W)
|
| Operating temperature |
-40~+55°C |
| Dimensions |
82.5*52*16mm |
| Weight |
90.7g |
Input/Output
| Interface |
Description |
| J30JZ-9PIN connector |
Power-input, uart, M0 control signals |
| M1 Dipswitch |
M1 control signal |
| SMA female |
Antenna port, the required antenna impedance is 50Ω |
J30JZ-9PIN connector can be assembled as TTL3.3V, RS232 uart port or RS422 uart port
