316L Stainless Steel Flat Wire Spool for Precision Forming

This 316L stainless steel flat wire is supplied on spool for precision forming and continuous production. The wire is cold drawn and bright finished, with flat cross-section dimensions selectable within the 0.15-12mm range according to the forming requirement.

Grade 316L contains molybdenum, which improves resistance to chloride and humid environments compared with 304. This makes the flat wire suitable for parts exposed to moisture, cleaning agents or mildly corrosive conditions. Surface condition, edge quality and dimensional tolerance are inspected before spooling.

Specifications

Applications

Precision Forming Parts

Flat wire for bending, stamping and roll forming, where consistent cross-section and edge quality directly affect the formed part.

Spring and Clip Components

316L flat wire is used for spring elements, clips and retaining parts that require corrosion resistance in humid conditions.

Filtration and Screen Parts

Flat wire profiles are used in wedge wire screens and filtration components where a defined edge profile matters.

General Hardware

Decorative and functional flat wire parts in bathroom, kitchen and outdoor hardware exposed to moisture.

Product Advantages

• 316L corrosion resistance - molybdenum-bearing 316L chemistry supports use in humid, chloride-containing and cleaning-agent environments.
• Controlled flat cross-section - thickness, width and tolerance are checked against the drawing before spooling, supporting stable forming.
• Edge quality control - edge condition is inspected to reduce cracking and burrs during bending and roll forming.
• Spool supply for continuous production - spool dimensions and winding can be matched to the customer's feeding equipment.
• Full size range 0.15-12mm - one supplier for fine and heavier flat wire sections, with 304 / 316 / 316L options.

Quality Control

Each batch is inspected for material grade, cross-section dimensions, tolerance, edge condition, surface finish, winding quality and spool packing against the agreed specification. Test reports are available per shipment.

Quick Selection Guide

1. Confirm the application (forming part / spring / screen / hardware)
2. Provide the flat wire drawing (thickness x width, tolerance)
3. Select grade (316L for humid or chloride exposure; 304 for general use)
4. Choose edge condition and surface finish
5. Confirm spool dimensions for your feeding equipment

Send your drawing, grade and target application for a technical confirmation and quotation.