Cold Drawn Stainless Steel Wire Spool for Precise Wire Forming

This cold drawn stainless steel wire is supplied on spool in a diameter range of 0.15-12mm, intended for precise wire forming and continuous feeding on automatic equipment. Cold drawing produces a controlled diameter and a smooth, bright surface that supports stable feeding and repeatable forming.

Typical grades are 304, 316 and 316L, selected by corrosion environment and forming requirement. Diameter tolerance, surface condition and winding quality are inspected before spooling, because spool wire performance depends as much on winding as on the wire itself.

Specifications

Applications

Precise Wire Forming

Bending, coiling, cutting and multi-stage forming where a consistent diameter keeps the formed part within tolerance.

Spool-Fed Production Lines

Continuous feeding on automatic forming, spring and bending machines, with spool dimensions matched to the equipment.

Hardware and Fastener Parts

Screws, springs, clips and small stainless steel components requiring a clean surface and predictable forming behavior.

Filtration and Mesh Components

Wire sections for woven mesh, filter supports and screening parts where surface cleanliness matters.

Kitchen and Bathroom Hardware

Formed wire parts for racks, baskets and bathroom accessories exposed to moisture.

Product Advantages

• Controlled diameter tolerance - each batch is inspected for diameter and dimensional tolerance against the agreed specification, supporting stable feeding.
• Cold drawn bright surface - the drawn surface is smooth and clean, reducing friction during feeding and improving the appearance of visible parts.
• Winding and spool control - winding quality, spool dimensions and coil weight are checked so the spool suits the customer's feeding equipment.
• Full range 0.15-12mm - one supplier for fine wire and heavier forming wire, with 304 / 316 / 316L grade options.
• Traceable inspection - material grade, diameter, surface, winding and packing are inspected per shipment, with test reports available.

Quality Control

Spool wire quality depends on more than diameter. Material grade, diameter tolerance, surface condition, winding regularity and spool specification all affect downstream forming. Each order is inspected against the agreed specification, and test reports can be provided per shipment.

Quick Selection Guide

1. Confirm the forming process and target part
2. Select the wire diameter within 0.15-12mm
3. Select the grade (304 for general use; 316/316L for humid or chloride exposure)
4. Confirm spool dimensions and coil weight for your equipment
5. Specify surface condition and mechanical requirements

Send your grade, diameter, spool specification and target application for a technical confirmation and quotation.