S6000-2RS Stainless Steel Deep Groove Ball Bearing 10*26*8mm SUNBEARINGProduct SpecificationBore diameter:10 mmLimiting speed184001/minOutside diameter:26 mmBasic dynamic load rating, radial3890NOverall width:8 mmBasic static load rating, radial1570NRows of BallsSingleMass0.02 kg (approx.)Outer ring type:UnsplitBore Tolerance+0/-0.008mmInternal clearance:CN(Standard)Seal MaterialNitrile RubberClosure type:2RSBearing Material440C Stainless SteelRing Material:Stainless SteelDa max24mmOperating Temperature Range-14 Degrees to 212 Degrees Fda min12mmBearing NumberS6000ra max0,3mmS6000 Bearing Short DescriptionS6000 bearing uses stainless steel material that can resist corrosion caused by moisture and other media. Provide closed (with seal or dust cover) or open design. Open bearings can also be equipped with seals or dust caps, and there are generally grooves on the side of the inner ring.The load-carrying capacity of these bearings is lower than that of high chromium steel bearings of the same sizeS6000 Deep Groove Ball Bearing FeaturesCompared with ordinary bearings, stainless steel ball bearings not only have obvious advantages in material but also in terms of technology and precision control, they are much stricter than ordinary bearings. During the working process, the stainless steel bearing works stably, with low noise, corrosion resistance, and wide application.Compared with ordinary bearing steel, stainless steel bearings have stronger anti-rust and anti-corrosion properties. Choose suitable lubricants, dust caps, etc., and can be used in an environment of -60℃~+300℃. Stainless steel deep groove ball bearings can resist corrosion caused by moisture and several other media. This type of single-row deep groove ball bearing is the same as the standard deep groove ball bearing made of carbon chromium (rolling bearing) steel. It has a deep bearing raceway groove and a high degree of fit between the bearing raceway and the ball.S6000 Bearing ApplicationStainless steel bearings are widely used in food processing, medical equipment, and pharmaceutical machinery due to their high mechanical strength and large load capacity.