Wuxi AJMS CTO carbon-block cartridge production line

1.300mm-400mm/minute if water cool carbon cartridge directly

2.150mm-200mm/minute if you want cool mold directly not cool carbon cartridge

Main features of CTO carbon filter cartridge machine

1.Good quality

2.Each parts produced by famous company

3.Electric-saving

(1) a leading manufacturer ,producing the machine for mare than 20 years.

(2) advanced technology,saving electric

4.Easy operation

(1) our engineer will teach you until you can operation by yourself

(2)Automatic feed machine and cto cutting machine is the best advanced skills in china.

The parameter of the production line(best energy-saving)

Rated power: 16.45 kw

Actual power: 8 kw

Raw material: Active carbon (granule)and PE gule(powder)

Active carbon percentage is 88%-90%,the other is 10%-12%

Inside diameter: mm-80mm (for our clients'requirement)

Outside diameter: 29mm-120mm (for our clients'requirement)

Length: 5'' 10'' 20'' 25'' 30''....40''...100''.

Machine Weight: 1.1-1.5 ton.

Voltage: three-phase 380V 50HZ.one-phase 220V/50HZ,Pls tell us if you want to change.

Layout of the whole product line: (1.5m*9m).

Minium require 13.5 square meter;20-30 square meter is better.

Wastage of material: 10kg material wastage will be needed for starting machine.

(One extruder just make one kind of inside diameter and outside diameter.

If you want to produce another diameter,you need to replace some parts of extruder.)

Carbon Filter Cartridge Machine/Production Line(parts of this line):

including:(Automatic mixer/Automatic feeder/Extruder/Work table/Automatic cutting machine/

Dust extraction).

Carbon Filter's Common Size:

Internal diamater :28,32MM

Outer diamter: >65MM

Production Limit Power 17KW

Practice Power Consumption : 9-10KW (When the machine works on the normal condition , temperature reaches the designated point , temperature will be automatically preserved , when the temperature drops ,it can go up to designated temperature automatically Production engineering.