Jinhongtong Group presents the JHT-SWB-SE8, a Earthquake grade 8 and wind load 12 level resistant steel warehouse building with Q355 high strength frame for seismic zones. Engineered with high-strength steel and manufactured under strict ISO 9001 quality control, this building combines structural reliability, fast construction and long service life, making it a preferred choice for Latin America seismic zones buyers worldwide.

• Earthquake Grade 8: JHT-SWB-SE8 is engineered to seismic grade 8 per GB 50011, with ductile moment frames and redundant load paths for Latin America seismic zones.
• Wind Load 12 Levels: The structure resists 12-level typhoon wind loads with rigid frame action and cross-bracing systems.
• Q355 High Strength: Q355B steel (355 MPa yield) reduces member sizes while increasing stiffness and energy dissipation capacity.
• Robust Bracing System: Cross bracing, knee bracing and diaphragm action distribute lateral forces evenly to the foundation.
• High-Strength Connections: Grade 10.9 high-strength bolted connections provide ductility and prevent brittle failure under cyclic loading.
• Certified Structural Design: Each project includes seismic and wind load calculations certified by licensed structural engineers.

Typical applications include emergency logistics warehouses, industrial plants, agricultural storage buildings and commercial facilities located in active seismic zones or typhoon corridors. The ductile steel frame absorbs seismic energy through controlled yielding while maintaining structural integrity.

For Latin American clients, the structural design follows both GB 50011 seismic provisions and local building codes, and every project includes a site-specific wind and seismic load report certified by licensed engineers before fabrication begins.

Jinhongtong operates 170 sets of advanced fabrication equipment, including large hydraulic press brakes, CNC drilling machines, large-scale shot blasting units and ultrasonic flaw detectors. Processing follows AISC 360, Eurocode 3 and EN 1090 standards, with strict raw material inspection, precision CNC cutting, professional submerged arc welding, and full visual and UT/MT non-destructive testing before delivery. This disciplined process ensures every member arrives on site with exact dimensions and flawless coating.

High-strength bolts are supplied in graded, batch-tested kits with torque specifications, and all steel is shot blasted and painted with epoxy-based anti-corrosion systems. Seismic base plates and anchor bolts are precision-drilled using CNC equipment.

Each project ships with a certified structural calculation report, shop drawings, and a site installation manual. Our engineers remain available for remote technical support during erection, and a 10-year structural warranty applies.