solar panel clips is made of two parts: Metal J hooks and self locking washers
| wire hooks type | material | thickness | length | surface treatment |
| J hooks | aluminum | 2.5mm | 95mm, 114mm | Phosphating |
| OEM | custom | custom | custom | custom |
|
Birds Exclusion Hooks |
aluminum |
0.6mm |
40mm, 30mm, 30mmx50mm |
black uv finished |
|
OEM |
custom |
custom |
custom |
custom |
| material treatment |
|
Installation features of Aluminum Self Locking Clips |
|
|
J hook standard package |
1. 100 pcs per pp bag, 80 bags per carton 2. 500pcs per pp bag, 16bags per carton 3.1000pcs per pp bag, 8 bags per carton |
|
self locking washer |
1. 100 pcs per pp bag, 60 bags per carton 2. 500pcs per pp bag, 12bags per carton 3.1000pcs per pp bag, 6 bags per carton |
![]() |
|
QTY used for installation:The number of clips needed will depend on the solar panel system, below are the regular QTY.
The QTY needed for one solar panel: A typical solar panel is approximately 1.6m tall and 1m wide, on a typical panel one should use 3 clips on each long edge and 2 clips on each short edge.
The QTY needed for one roll: usually the length of solar panel roll is 30m, each roll is allocated with 60 clips.
The QTY needed for a standard 3kW system (2 rows of 6 panels each - 12 panels total installed in a portrait orientation) : 35 clips.
The distance between the clips: when install the mesh, we clips every 18 inches/450mm.

