Anodized Aluminum Sheet 1050 1050A For Cookwares And Lights Or Other Products

Product Description

1070A aluminum plate is industrial pure aluminum. Industrial pure aluminum has the general characteristics of aluminum, such as low density, good conductivity and thermal conductivity, good corrosion resistance and good plastic processing performance. It can be processed into plates, strips, foils and extruded products, and can be used for gas welding, argon arc welding and spot welding. Industrial pure aluminum cannot be strengthened by heat treatment, but its strength can be improved by cold deformation. The only heat treatment form is annealing.

Performance

High conductivity: The conductivity of 1070 aluminum sheet can reach 62, its thermal conductivity and electrical conductivity is second only to copper, silver, and gold.

Lightweight: At the same volume, 1070 aluminum is lighter than steel, iron, and copper.

Excellent corrosion resistance: The 1070 aluminum sheet has excellent corrosion resistance in most environments. Such as exposure to the atmosphere, immersion in water, most acids, organic compounds.

1070 aluminum sheet is a non-heat treated alloy that is cooled and processed to increase its strength.

Can accept contact welding and gas welding.

Aluminum alloy has a long service life, low cost, and high recovery value.

Heat Treatment Process

Complete annealing:Heating to 390 ~ 430 °C;Depending on the thickness of the material, the holding time should be controlled from 30 to 120 minutes;The temperature decreases at a rate of 30 ~ 50 °C/H. When the temperature of the furnace is cooled to 300 °C, then air-cooled.

Rapid annealing:Heating to 350 ~ 370 °C;Depending on the thickness of the material,

the holding time should be 30 ~ 120 min, air or water cooling

Quenching and aging:Quenching at 500 ~ 510 °C, air cooling;Artificial aging was 95 ~ 105 °C, 3H, air cooling;

Natural aging-room temperature 120H

Product Display