High Efficiency Plastic Bottle Making Machine / Blow Molding System For Juice Bottle


Quick Detail:

1, Machine structure: Preform heating-blowing in one machine
2, Can be connected to production line
3, Automation: TOTALLY automatic
4, Bottle output: 4 pcs for one mould
5, Capacity: 4000BPH
6, Bottle type: PET bottles for filling juice and tea (hot filling)
7, Auxiliary machine needed: YES


Description:

Bottle blow molding system is used to blow plastic bottles in PET and PP. These bottles can be used to fill mineral water, juice, tea, carbonated water, and chemical liquid etc. So according to client's filling material, we can help to sculpt the bottle shapes before making the bottle moulds.


Applications and features:

- Widely used in food, beverage, dairy, cosmetic, medical, chemical industrial and etc;
- PLC control, electric parts are well-known brand;
- Develop different bottles for explore more market;
- High adjusting performance to enable preheat the preforms perfectly by adjust the voltage control area in the PLC, which could adjust the temperature of the infrared lights in the pre-heater, and keep the proper temperature and humidity invariable.
- High safeties with security automatic-locking device in each mechanical action, which will make the production into a perfect safe environment, in case of the breakdown in certain procedure
- Easy operation and maintenance;
- Compact structure for the preform heating, blowing, and bottle forming are realized in one machine;
- All the movements of bottle blowing machine are driven by the air cylinder, no need the hydraulic oil and even no pollution.
- Auxiliary machines are needed during blowing including LP (Low pressure) air compressor, HP (High pressure) air compressor, air dryer, air filters, air tank, and mould chiller.


Technical parameter

- Stable performance with advanced PLC.
- Automatic preform conveyer to save human cost.
- Introduce the FESTO air cylinder to avoid contamination and noise.
- Strong clamping force with high pressure and double crank links to lock the mould.
- Two ways of operating: automatic and manual.
- Low cost,high efficiency,easy operation and maintenance etc, profited from the fully automatic technological process.
- Easy for you to install,test and start up.