Hot bottom ash destroys ordinary conveyors: the trough warps, the bearings seize and the flighting scales away. This high temperature screw conveyor is built differently. The screw is fabricated from heat-resistant steel, the trough carries a 50mm castable refractory lining, the end bearing housings are water cooled, and expansion joints absorb thermal growth along the casing.
| LSY-133 | 133mm | 0.8-1 T/H | 3-10m | 3kW |
Note: all dimensions, capacity and motor power are customized according to the material bulk density, conveying distance and installation angle.
Please tell us the material temperature at the inlet, the ash particle size, the tonnage per hour and the available cooling water pressure. For material above 400 C we offer a double-shell air-cooled casing or a water-jacketed trough.
The machine is wrapped with waterproof film, fixed on a steel pallet and packed in a fumigation-free export wooden case. Spare parts, motor and control cabinet are packed separately. Delivery time is 7-15 working days after deposit, shipping by sea, rail or air per your forwarder.
Q: What happens if the ash is hotter than 400 C?
A: Choose the air-cooled or water-jacketed version; the working temperature can then be raised to 600 C.
Q: Is cooling water always needed?
A: Yes for continuous duty above 300 C. A small flow of 0.5 m3/h at 0.2 MPa is enough for the bearing housings.
Send your working conditions, get a tailored offer
Please tell us: material name, bulk density, particle size, required capacity (t/h), inlet-to-outlet centre distance (m) and installation angle. Our engineers will reply with a drawing, motor selection and FOB/CIF price within 24 hours. OEM and ODM orders are welcome.