The Top Discharge Centrifuge is designed for batch washing, solid-liquid separation, and dewatering of filterable polymer beads after polymerization, post-treatment, purification, classification, or recovery.

Polymer bead slurry may contain spherical polymer particles, water or solvent, residual monomer, dispersants, salts, reaction auxiliaries, fine-particle fractions, and soluble impurities. The dewatering stage must remove free liquid efficiently while retaining the beads, limiting unnecessary bead breakage, and supporting clean transfer to downstream drying, screening, storage, or packaging.

This configuration is suitable for batch polymer bead processes where particles are filterable, reasonably free-flowing, and able to form a stable bed inside the basket.

• Polymer bead dewatering after suspension polymerization
• Spherical polymer particle washing and recovery
• Polymer bead separation after post-treatment
• Water washing after neutralization or purification
• Solvent washing before downstream drying
• Polymer bead recovery from process liquor
• Adsorbent polymer bead dewatering
• Macroporous polymer media washing
• Polymer microsphere recovery, where particles are filterable
• Polymer bead preparation before screening or classification
• Dewatering before drying, curing, storage, or packaging
• Batch recovery of reusable polymer-based media
• Multi-product batch handling requiring basket cleaning and media replacement

Peony provides the batch separation section between upstream polymerization, washing, slurry storage, or purification equipment and downstream drying, screening, storage, or packaging systems.

Polymerization Reactor / Washing Tank → Slurry Holding Tank → Controlled Feed → Top Discharge Centrifuge → Filtrate Collection / Recycle → Optional Bead Washing → Spin Dewatering → Top Opening → Polymer Bead Discharge → Dryer / Screen / Storage / Packaging

Peony can provide:

• Top discharge centrifuge selected according to bead size, batch capacity, and slurry condition
• Screen or filter media selection based on bead diameter and fines content
• Controlled feed arrangement for even basket loading
• Optional water washing, solvent washing, or multi-stage washing system
• Filtrate collection, recycle, recovery, or treatment connection
• Collection bin, hopper, trolley, or downstream transfer interface
• Corrosion-compatible product-contact material selection
• Standard or explosion-proof electrical configuration, as required
• PLC-controlled batch operation with safety interlocks
• Connection support for dryer, screen, classifier, storage bin, or packaging equipment

1. Polymer Bead Slurry Feeding

Polymer bead slurry enters the rotating basket through a controlled feed system. The feed rate is adjusted to support even loading and avoid excessive bead movement.

2. Initial Filtration

Water, solvent, mother liquor, or process liquid passes through the screen or filter medium and basket perforations before leaving through the filtrate outlet.

3. Polymer Bead Retention

The polymer beads remain inside the basket while the liquid phase is discharged.

4. Bead Bed Formation

As feeding continues, the retained beads gradually form a stable and permeable bed on the inner basket wall.

5. Optional Bead Washing

Wash liquid can be introduced to reduce residual monomer, salts, dispersants, solvent, reaction liquor, or soluble impurities retained between the polymer beads.

6. Spin Dewatering

The basket continues rotating to reduce free liquid retained in the polymer bead bed.

7. Machine Stop and Top Opening

After the programmed batch cycle is complete, the centrifuge stops and the top cover is opened.

8. Top Polymer Bead Discharge

The dewatered polymer beads are discharged manually through the top opening and transferred to a collection bin, dryer, screen, classifier, storage bin, or packaging process.

Stable Bead Retention

The basket filtration system retains polymer beads while allowing water, solvent, or process liquor to pass through the filter medium.

Reduced Free Liquid Before Drying

Filtration followed by spin dewatering helps reduce liquid carryover before the polymer beads enter drying, screening, storage, or packaging.

Optional In-Basket Washing

A controlled wash step can reduce residual monomer, salts, dispersants, reaction liquor, or soluble impurities before downstream handling.

Bead Size-Matched Filter Media

Screen opening, mesh size, or filter media rating can be selected according to bead diameter, fines content, filtrate clarity requirements, and acceptable particle loss.

Controlled Batch Handling

The batch process allows adjustment of feed quantity, wash time, spin-drying time, and discharge timing according to actual polymer bead condition.

Please provide:

• Polymer type
• Bead diameter range and fines content
• Particle density and bulk density
• Bead hardness or breakage sensitivity
• Slurry solids concentration
• Wash water, solvent, or process liquid composition
• Feed temperature and slurry viscosity
• Required batch capacity or daily production capacity
• Required filtrate clarity
• Target residual moisture
• Washing stages required
• Residual monomer, salt, or impurity removal target
• Corrosion condition
• Explosion-proof requirement, if applicable
• Required product-contact material
• Downstream drying, screening, classification, storage, or packaging arrangement

Is a Top Discharge Centrifuge suitable for polymer bead dewatering?

Yes, provided the polymer beads are filterable and can form a stable, permeable bed inside the basket.

Can polymer beads be washed inside the centrifuge?

Yes. An optional in-basket washing system can be configured to reduce residual monomer, salts, dispersants, solvent, or process liquor before final spin dewatering.

Will the centrifuge damage polymer beads?

This depends on bead hardness, particle size, feed method, washing conditions, basket loading, and discharge practice. Controlled feeding and suitable operating parameters help reduce unnecessary breakage.

Can the filtrate be recycled?

Yes. Filtrate can be collected for recycle, recovery, further washing, solvent recovery, or wastewater treatment according to the process route.

Is explosion-proof configuration available?

Yes. Explosion-proof motors and electrical configuration can be provided where required by solvent properties, area classification, and plant safety standards.

Peony welcomes distributor and agent cooperation with polymer manufacturers, polymer processing companies, chemical engineering contractors, filtration equipment suppliers, specialty materials producers, and industrial separation partners.

We support centrifuge selection, screen and filter media matching, bead washing design, material configuration, filtrate handling connection, installation guidance, commissioning support, spare parts, and after-sales service.

Send us your polymer type, bead size, fines content, slurry solids concentration, wash liquid information, required batch capacity, target moisture, washing requirement, corrosion condition, and downstream handling arrangement.