TOF Sensors 50-4000mm Red LED NPN Reflective Type Detect Time of Flight Sensor
Product Description
What is a TOF sensor used for?
A TOF sensor measures the time it takes for light (usually infrared) to reflect off an object and return to the sensor. This data is used to calculate distances, enabling applications like 3D imaging, gesture recognition, and obstacle avoidance in devices such as smartphones, robots, and autonomous vehicles.
TOF sensors are used in various fields, including:
Technical Data
Detection method | Reflective type |
Output | NPN output |
Action mode | Set the TOF principle with one click |
Detection distance | 50~4000 mm |
Light source | Red LED (940nm) IEC CLASS1 |
Supply voltage | DC12~24V 士10% |
Consumption of electricity | Power consumption is less than 480mW (power supply voltage is DC24V, consumption current is less than 20mA) |
Control output | Load power supply voltage DC26.4V or less, load 80mA or less current collector open circuit output (NPN/PNP output varies depending on the model) |
Output residual voltage | Residual voltage below 1V (load current less than 10mA) |
Residual voltage below 2V (load current less than 10~80mA) | |
Protection circuit | Power supply reverse connection protection/load short circuit protection/output reverse connection protection |
Response time | Action and return: less than 100ms each |
Ambient temperature | During operation: -20~+50°C, during storage: -40~+70°C (no freezing or condensation) |
Ambient humidity | During operation: 35~85%RH, during storage: 35~95%RH (no freezing or condensation) |
Ambient illumination | Sunlight: below 10.000lx |
Protective structure | IEC60529 IP65 |
Dimensional Drawing
(1) Place the detected object at the desired position and press the teach pendant
(2) Press the teaching button for more than 3 seconds until the traffic light flashes alternately. Release the button to complete teaching.
DC line 4-wire NPN output