The International Rectifier IRAMS10UP60B is an Integrated Power Hybrid IC designed for appliance motor drive applications such as washing machines and refrigerators. It features Plug N Drive technology for compact, high-performance AC motor-drivers in a single isolated package, simplifying design. The module includes an internal shunt resistor for easy current feedback and overcurrent monitoring, a built-in temperature monitor, over-current protection, short-circuit rated IGBTs, and under-voltage lockout for enhanced protection and fail-safe operation. Integration of bootstrap diodes and a single-polarity power supply further simplifies utilization and reduces costs.
| Parameter | Description | Value | Units |
|---|---|---|---|
| Absolute Maximum Ratings | IGBT/Diode Blocking Voltage | 600 | V |
| Positive Bus Input Voltage | 450 | V | |
| RMS Phase Current @ TC=25C (Note 1) | 10 | A | |
| RMS Phase Current @ TC=100C (Note 1) | 5 | A | |
| Pulsed RMS Phase Current (Note 2) | 15 | A | |
| PWM Carrier Frequency | 20 | kHz | |
| Power dissipation per IGBT @ TC =25C | 27 | W | |
| Isolation Voltage (1min) | 2000 | VRMS | |
| Operating Junction temperature Range (IGBT & Diodes) | -40 to +150 | C | |
| Mounting torque Range (M3 screw) | 0.5 to 1.0 | Nm | |
| Inverter Section Electrical Characteristics @TJ= 25C | Collector-to-Emitter Breakdown Voltage | 600 | V |
| Collector-to-Emitter Saturation Voltage | 1.70 - 2.40 | V | |
| Bootstrap Diode Forward Voltage Drop | 1.30 - 1.70 | V | |
| Diode Forward Voltage Drop | 1.10 | V | |
| Current Protection Threshold (positive going) | 13.1 - 16.4 | A | |
| Inverter Section Switching Characteristics @ TJ= 25C | Turn-On Switching Loss | 200 - 235 | J |
| Turn-Off Switching Loss | 75 - 100 | J | |
| Total Switching Loss | 275 - 335 | J | |
| Diode Reverse Recovery energy | 15 - 25 | J | |
| Diode Reverse Recovery time | 70 - 100 | ns | |
| Turn-On IGBT Gate Charge | 29 - 44 | nC | |
| Recommended Operating Conditions | High side floating supply voltage | VS+12 to VS+20 | V |
| Low side and logic fixed supply voltage | 12 to 20 | V | |
| ITRIP input voltage | VSS to VSS+5 | V | |
| Logic input voltage (LIN, HIN) | VSS to VSS+5 | V | |
| Logic input voltage (EN) | VSS to VSS+5 | V | |
| Static Electrical Characteristics | Logic "0" input voltage | 3.0 | V |
| Logic "1" input voltage | 0.8 | V | |
| VCC and VBS supply undervoltage Positive going threshold | 10.6 - 11.6 | V | |
| Input Clamp Voltage (HIN, LIN, ITRIP) | 4.9 - 5.5 | V | |
| ITRIP threshold Voltage | 440 - 540 | mV | |
| Dynamic Electrical Characteristics | Input to Output propagation turn- on delay time | 590 | ns |
| Input to Output propagation turn- off delay time | 700 | ns | |
| Input Filter time (HIN, LIN) | 100 - 200 | ns | |
| Dead Time (VBS=VDD=15V) | 220 - 360 | ns | |
| Matching Propagation Delay Time (On & Off) | 40 - 75 | ns | |
| Thermal and Mechanical Characteristics | Thermal resistance, per IGBT | 4.2 - 4.7 | C/W |
| Thermal resistance, per Diode | 5.5 - 6.5 | C/W | |
| Creepage Distance | 3.2 | mm | |
| Internal NTC - Thermistor Characteristics | Resistance @ TC = 25C | 97 - 103 | k |
| Resistance @ TC = 125C | 2.25 - 2.80 | k | |
| B-constant (25-50C) | 4165 - 4335 | k | |
| Internal Current Sensing Resistor - Shunt Characteristics | Resistance | 33.0 - 33.7 | m |
| Temperature Coefficient | 0 - 200 | ppm/C |