The EconoDUAL3 module with TRENCHSTOPIGBT7 and emitter controlled 7 diode, featuring PressFIT technology, an integrated temperature sensor, NTC, and current sense shunt, offers high power density for demanding applications. It is qualified for industrial applications according to relevant IEC standards.
| Component | Parameter | Symbol | Note or test condition | Values | Unit |
| IGBT, Inverter | Collector-emitter voltage | VCES | 1200 | V | |
| Continuous DC collector current | ICDC | Tvj max = 175 C, TC = 95 C | 750 | A | |
| Maximum RMS module DC- terminal current | ItRMS | TTerminal = 90 C, TC = 90 C | 562 | A | |
| Repetitive peak collector current | ICRM | tp limited by Tvj op | 1500 | A | |
| Gate-emitter peak voltage | VGES | 20 | V | ||
| Collector-emitter saturation voltage | VCE sat | IC = 750 A, VGE = 15 V | 1.50 - 1.75 | V | |
| Gate threshold voltage | VGEth | IC = 15.3 mA, VCE = VGE, Tvj = 25 C | 5.15 - 6.45 | V | |
| Input capacitance | Cies | f = 100 kHz, Tvj = 25 C, VCE = 25 V, VGE = 0 V | 115 | nF | |
| Turn-on delay time (inductive load) | tdon | IC = 750 A, VCC = 600 V, VGE = 15 V, RGon = 0.51 | 0.293 - 0.341 | s | |
| Turn-off delay time (inductive load) | tdoff | IC = 750 A, VCC = 600 V, VGE = 15 V, RGoff = 0.51 | 0.450 - 0.587 | s | |
| Turn-on energy loss per pulse | Eon | IC = 750 A, VCC = 600 V, L = 25 nH, VGE = 15 V, RGon = 0.51 | 36.7 - 70.5 | mJ | |
| Turn-off energy loss per pulse | Eoff | IC = 750 A, VCC = 600 V, L = 25 nH, VGE = 15 V, RGoff = 0.51 | 63.6 - 123 | mJ | |
| Thermal resistance, junction to case | RthJC | per IGBT | 0.0520 | K/W | |
| Diode, Inverter | Repetitive peak reverse voltage | VRRM | 1200 | V | |
| Continuous DC forward current | IF | 750 | A | ||
| Repetitive peak forward current | IFRM | tP = 1 ms | 1500 | A | |
| I2t - value | I2t | tP = 10 ms, VR = 0 V | 35000 - 46800 | As | |
| Forward voltage | VF | IF = 750 A, VGE = 0 V | 1.60 - 2.10 | V | |
| Peak reverse recovery current | IRM | VCC = 600 V, IF = 750 A, VGE = -15 V, -diF/dt = 6800 A/s | 392 - 555 | A | |
| Recovered charge | Qr | VCC = 600 V, IF = 750 A, VGE = -15 V, -diF/dt = 6800 A/s | 44.5 - 124 | C | |
| Reverse recovery energy | Erec | VCC = 600 V, IF = 750 A, VGE = -15 V, -diF/dt = 6800 A/s | 18.2 - 48.9 | mJ | |
| NTC-Thermistor | Rated resistance | R25 | TNTC = 25 C | 5 | k |
| Deviation of R100 | R/R | TNTC = 100 C, R100 = 493 | -5 - 5 | % | |
| Power dissipation | P25 | TNTC = 25 C | 20 | mW | |
| Package | Isolation test voltage | VISOL | RMS, f = 50 Hz, t = 1 min | 3.4 | kV |
| Material of module baseplate | Al2O3 | ||||
| Creepage distance terminal to baseplate | dCreep nom | (PD2, IEC 60664-1, Ed. 3.0) | > 15 | mm | |
| Creepage distance terminal to terminal | dCreep nom | (PD2, IEC 60664-1, Ed. 3.0) | 12.1 | mm | |
| Clearance terminal to baseplate | dClear nom | > 12.5 | mm | ||
| Clearance terminal to terminal | dClear nom | 10.0 | mm | ||
| Weight | G | 345 | g |