Product features

Product Specification
| 1.Electrical Characteristics | |
| Total resistance | 100Ω-3MΩ | 
| Total resistance tolerance | 50Ω~1KΩ:±30%/1KΩ~500KΩ:±20%/500KΩ~3MΩ:±30% | 
| Residual resistance | R≤10KΩ: 10ΩMax./10KΩ<R>500KΩ:20ΩMax./R≥500KΩ Nominal total resistance of 0.1% or less | 
| Rated Power | Linear taper:0.05W, Audio Taper 0.025W | 
| Insulation resistance | 100MΩ min. 250V DC | 
| Voltage proof | 300V AC for 1 minute | 
| Maximum operation voltage | 50V AC/10V DC | 
| 2.Mechanical Characteristics | |
| Rotation stopper strength | Min:3Kgf | 
| Total rotation angle | 300o±5o | 
| Totational torque | 10-100gf.cm | 
| Key push-pull strength | Min:8Kgf | 
| Key Wobble | Max: 0.6*L/20mm P-P | 
| Terminal Strength | 5N for 1 minute | 
| 3.Switch Characteristics | |
| Switch Type | Push | 
| Rated Power | 0.1A 5V DC | 
| Switch Torque | 500gf+/-200gf.cm Max | 
| Switch Travel | 0.5mm | 
| Operating Life without load | 10000 cycles 100mΩ Max | 
| Operating life with load:as rating | 10000 cycles 200mΩ Max | 
| Initial contact resistance | 100mΩ Max | 
| Insulation resistance | 100MΩ min. 250V DC | 
| Voltage proof | 300V AC for 1 minute | 
| 4.Environmental Performance | |
| Operating temperature range | -10oC to +70oC | 
| Storage temperature range | -40oC to +85oC | 
| 5.Welding heat reference | |
| Manual Soldering | 96.5 Sn/3.0 Ag/0.5 Cu Sold Wire or No-Clean Rosin Core Wire 280oC Max. For 3 Seconds | 
| Wave Soldering | 96.5 Sn/3.0 Ag/0.5 Cu Sold Wire or No-Clean Flux 260oC Max. For 5 Seconds | 




