AC Servo Motor Robot Palletizing Pick And Place In Chemical Industry
Brand Motor Robot Palletizing Low Cost Pick And Place In Chemical Industry
Brief Introduction
AGMT XY-SR series palletizing robot is a four-degree cylinder surface coordinate palletizing robot, primarily operated by horizontal movement axis, vertical movement axis, rotation foundation, and hand axis. The multilayer palletizing capability enables the fork to move items into storage. This equipment utilizes PLC touch screen and intelligent management systems, making it not only simple and easy to master but also reducing labor requirements.
Robotic Palletizing System Technical Parameters
| Model No. |
AGMT-SR-210 |
| Drive |
AC servo motor drive |
| Installation |
On floor |
| Max Palletizing Weight (contains weight of gripper) |
210kgs |
| Handing Capacity |
1700 Times/Hour |
| Movement Axis |
Normally 4 axes: A, B, C, D (can be 6 axis) |
| Movement scope |
A-Axis (Horizontal): 1500mm
B-Axis (Vertical): 2300mm
C-Axis (Body): 330°
D-Axis (Gripper): 330°
|
| Location Accuracy |
±0.5mm |
| Power |
6.5KVA |
| Compressed Air |
0.5Mpa |
| Robot Weight (not contains weight of gripper) |
1150kgs (+/-10%) |
Features
Palletizing robots from SAIMO can meet virtually any palletizing requirement. Thanks to a wide selection of end effectors, robotic palletizers provide maximum flexibility. Whether you need to handle cases, bags, pails, jugs, drums, or any other type of container, we can provide you with adapted, reliable and highly productive palletizers for small-, medium-, and large-scale production. With hundreds of palletizing robots sold worldwide, SAIMO has developed unique expertise in the manufacturing of fast and reliable robotic palletizers. Thanks to the high quality of ABB robots and the simplicity of their design, SAIMO palletizing robots are extremely reliable and require very little maintenance.
Function
- Simple structure, low failure rate and convenient maintenance
- Few main parts and accessories, low maintenance cost
- Low power consumption, only 1/3 consumption of the same kind of mechanical stacker crane from other companies
- Only need a little floor space, floor utilization ratio is high
- Diverse gripper, flexibly adapt various palletizing requirements
Commission and After-sale Service
We make accurate factory layout design according to customer's factory size; if the customer needed, we could make workshop design with electric power, water supply, gas power, material storage, final storages, workers' restroom, etc. If customer need, we will send engineer for the commissioning service. 1-2 of our engineer will go to your factory to install and adjust the processing line to realize normal production at shortest time.
Installation Instructions
We will supply you the user manual and electrical drawing of all the machines for you to install the machines by yourself. If you think you cannot install the machines by yourself, we can send engineer to your factory for installing and debugging etc.