MachineU > China Products > Beauty & Personal Care > Other Beauty & Personal Care Products(new)
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
Specifications
Product name :
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
Data logger :
Graphic dot matrix LCD with a resolution of 128 × 64
The micro-pressure measurement range :
-1000Pa to 1000Pa
Accuracy :
1Pa
The suction volume of the suction pump :
not less than 40L / min ~ 100L / min
Ventilation volume :
Constant at (85 ± 1) L / min
Power supply :
AC220V, 50Hz
Key words :
Gas Resistance
Brand Name :
ZL
Model Number :
ZL-5062
Certification :
CE,ISO
Place of Origin :
China
MOQ :
1 set
Price :
Negotiable
Payment Terms :
L/C, T/T, Western Union
Supply Ability :
60 Sets
Delivery Time :
5-8 work days
Packaging Details :
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester is packaged within wooden case.
Description
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
Product Overview

This instrument is used to measure the inspiratory resistance and expiratory resistance of respirators and masks under specified conditions. It is applicable to national labor protection supplies inspection agencies, mask manufacturers, and related inspection departments for testing ordinary masks, dust masks, medical masks, and anti-fog mask products.

Compliance Standards
  • GB 2626-2006 Breathing protective equipment Self-priming filter anti-particulate respirator 6.5 6.6
  • GB/T 32610-2016 Technical Specifications for Daily Protective Masks
  • YY0469-2011 Medical Surgical Masks
  • GB19083-2010 Medical Protective Mask
  • YY0969-2013 Disposable Medical Mask
Technical Parameters
Instrument Composition Adjustable flow rate air source, standard human head mold, two intubation systems for inhalation and exhalation, and respiratory resistance measurement system
Flow Sensor High sensitivity with very small starting flow; uses thermal mass flow meter chip ensuring high-precision measurement without temperature and pressure compensation
Flow Meter Range 0 L/min to 100 L/min with ±2% accuracy
Flow Sensor Features Multiple sensors integrated on single chip, high range ratio, excellent zero point stability, full range high stability and accuracy, excellent repeatability, low power consumption, low pressure loss, fast response speed
Data Logger Graphic dot matrix LCD with 128×64 resolution, 4M memory for measurement value recording
Micromanometer Sensor Two-wire system with high accuracy and good stability; explosion-proof design; range and zero point continuously adjustable; measurement range -1000Pa to 1000Pa with 1Pa accuracy
Gas Path System Special gas path conversion elements for convenient and fast conversion between exhalation and inhalation systems
Suction Pump Capacity Not less than 40L/min to 100L/min
Ventilation Volume Constant at (85 ± 1) L/min
Power Supply AC220V, 50Hz
Maintenance Instructions
  • Do not carry by the bottom of the control box during transportation to avoid damage
  • Wipe electroplated parts with oil to prevent rust and maintain brightness
  • After testing, clean the machine thoroughly and regularly oil active fulcrums to increase service life and sensitivity (use mixture of butter and engine oil)
  • Wipe control panel with dry cloth to prevent moisture damage to IC electronic parts
  • Store all fixtures and accessories properly, wiping off anti-rust oil to prevent corrosion
  • After transportation, ensure machine is placed on stable foundation and properly leveled
  • Connect power supply as indicated (ensure correct phase to prevent leakage)
  • Properly ground the instrument according to specifications to avoid leakage danger and signal interference
  • Do not unplug during operation
  • Operation and maintenance should be performed by professional personnel only
For major issues, contact our maintenance department - do not attempt self-repair to avoid causing significant losses.
Product Image
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
Product tags

breath testing kit

,

breath test kit

,

medical air filter
Send your message to this supplier
Send Now

GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester

Ask Latest Price
Watch Video
Product Detail
Product name :
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
Data logger :
Graphic dot matrix LCD with a resolution of 128 × 64
The micro-pressure measurement range :
-1000Pa to 1000Pa
Accuracy :
1Pa
The suction volume of the suction pump :
not less than 40L / min ~ 100L / min
Ventilation volume :
Constant at (85 ± 1) L / min
Contact Supplier
video
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester
GB 2626-2006 Disposable Medical Mask Respiratory Resistance Tester

Dongguan Zhongli Instrument Technology Co., Ltd.

Verified Supplier
9 Years
guangdong, dongguan
Since 2014
Business Type :
Manufacturer
Main Products :
Rubber Testing Machine, Vulcanizing Press Machine, Two Roll Mill
Total Annual :
1 Million-2.5 Million
Employee Number :
100~150
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Textile Testing Machine
MachineU China Products Beauty & Personal Care Other Beauty & Personal Care Products(new)
Contact Supplier
Submit Requirement