GBS-02-U1000 1000kg 0.15mm Heavy Duty Arc Welding Positioner Turntable

Overview

• • The GBS-02-U1000 is a heavy duty U-type welding positioner built to rotate large workpieces for KUKA, FANUC and YASKAWA robot welding operations.
• • It carries a 1000 kg rated load and offers dual axis rotation of +/-360 degrees plus a one-axis tilt of +/-180 degrees for flexible part handling.
• • Repeatability of +/-0.15 mm keeps the workpiece aligned to the robot program, so heavy parts are welded in the programmed position.
• • A gyre radius of R600 mm and a 385 mm rotary table support tubes, frames and fabricated assemblies of practical size.
• • Rotation speeds of 0.05 to 0.5 and 0.5 to 3.5 RPM cover gentle positioning and faster manoeuvring, driven by a three-phase 220 V supply.
• • Weighing about 2200 kg, the positioner provides a rigid base that resists deflection under heavy welding loads and long shifts.
• • The U-type layout holds cylindrical and boxy parts securely, keeping the joint under the torch as the table turns.

Key Specifications

Advantages

• • A 1000 kg load capacity handles heavy fabricated assemblies.
• • Dual axis rotation of +/-360 degrees positions parts under the torch.
• • +/-0.15 mm repeatability keeps workpieces aligned to the robot program.
• • Two speed ranges cover gentle positioning and faster manoeuvring.
• • A rigid 2200 kg base resists deflection under heavy welding loads.
• • A R600 mm gyre radius supports tubes, frames and large fixtures.
• • Compatible with KUKA, FANUC and YASKAWA welding robots.
• • A U-type layout holds bulky parts securely during rotation.

Applications

• • Heavy duty arc welding cells
• • Structural frame and tube welding
• • Automotive and machinery fabrication
• • Robot welding of large assemblies
• • Rotary work holding for automation
• • General heavy fabrication shops
• • Pressure vessel and tank fabrication

FAQ

Q: What load can the GBS-02-U1000 carry?
A: It has a 1000 kg rated load, which suits heavy fabricated assemblies, frames and tubes in a robot welding cell.

Q: How does the positioner move the workpiece?
A: It provides double-axis rotation of +/-360 degrees plus a one-axis tilt of +/-180 degrees, positioning the part under the robot torch.

Q: How accurate is the positioning?
A: Repeatability is +/-0.15 mm, keeping the workpiece aligned to the robot program so heavy parts are welded in the programmed position.

Q: Which robots can it work with?
A: It is designed for KUKA, FANUC and YASKAWA industrial arc welding robots, and integrates as a rotating external axis.

Q: What power supply does it need?
A: The positioner runs on a three-phase 220 V, 50 Hz supply and covers two speed ranges from 0.05 to 3.5 RPM.

Q: What is the rotary table size?
A: The rotary table is 385 mm and the gyre radius is R600 mm. Contact us with your part size for a configuration.