300-1000kg Automatic Rotary Welding Positioner Turntable IP65 for Robot Work

Overview

• • This automatic rotary welding positioner is a turntable that rotates and flips workpieces so a torch or robot can reach every joint cleanly.
• • Rated load options of 300 kg, 500 kg and 1000 kg cover a wide range of parts on a single machine family.
• • Flip motor power from 1 kW to 3 kW matches the load, while 0 to 360 degree rotation keeps the weld in the best position.
• • Precision of better than 1 arcmin keeps the joint aligned as the table turns, improving seam quality and cutting rework.
• • IP65 protection keeps dust and splash out of the drive, so the positioner suits busy welding and assembly bays.
• • The table height is 800 mm by default and customizable, and the input supply is 220 V or 380 V at 50 or 60 Hz.
• • Automatic rotary speed regulation lets the operator match turning speed to the weld pass without stopping production.

Key Specifications

Advantages

• • Load options from 300 kg to 1000 kg suit a wide range of parts.
• • Automatic 0 to 360 degree rotation keeps the weld in the ideal position.
• • Better than 1 arcmin precision improves seam quality and reduces rework.
• • Adjustable and automatic speed regulation matches each weld pass.
• • IP65 protection keeps dust and splash out of the drive train.
• • Flip motor power from 1 kW to 3 kW matches the rated load.
• • A customizable table height suits different operators and torch angles.
• • Works with manual torches and robot welding cells alike.

Applications

• • Robot welding cells
• • Automatic rotating weld work
• • Assembly and positioning stations
• • Round and cylindrical part welding
• • General fabrication and repair shops
• • Pressure vessel and tank welding

FAQ

Q: What loads can this turntable handle?
A: It is available with rated loads of 300 kg, 500 kg and 1000 kg, covering a wide range of part weights and sizes.

Q: How precise is the rotation?
A: Precision is better than 1 arcmin, keeping the joint aligned as the table turns to improve seam quality and reduce rework.

Q: Is the positioner protected against dust?
A: Yes. It carries IP65 protection, which keeps dust and splash out of the drive so it suits busy welding and assembly bays.

Q: What power supply does it need?
A: The positioner runs on 220 V or 380 V at 50 or 60 Hz, with flip motor power of 1 kW to 3 kW depending on the load.

Q: Can the speed be adjusted?
A: Yes. The rotation speed is adjustable with automatic regulation, so the turn can be matched to each weld pass.

Q: Can it serve a robot cell?
A: Yes. It works as a rotating work holding axis with robot welding cells and manual torches. Contact us for a configuration.