3AAA Battery Operated Wireless LED Night Light With Warm White Light

Wireless LED Night Light Features:

Human body induction and light control, a quite user-friendly design.

Lighted by 6 warm white LEDs, high brightness and long service life.

Powered by 3pcs 1.5V AAA batteries (not included), energy-saving, environmentally friendly.

No need wire and plug, easy installation, convenient to use.

You can stand on the table and the wall.

Behind with magnet, can be adsorbed on any surface iron.

Can be widely used in children room, bedroom, corridor, bathroom, cabinets etc.

Installation method

1) Magnets can adsorb any place with iron.

2) Strong 3M glue fixation.

Product instructions

Battery: Use 3AAA or USB plug . (Note: USB can only be plugged in and does not charge batteries directly).

installation: Before installing the 3AAA battery, open the rear cover, then open the

battery cover, install the rear cover, and tighten the rear cover.

Lighting: This product is divided into scenario mode (Color) and white light mode (White). If

white light mode is used, please switch the switch to White position.

Mode: This product has constant brightness mode (On), night induction mode (Auto) and close (Off). If you use night induction mode, switch the switch to Auto position to meet different needs.

Data

Power of light source: 1W

Input voltage: DC 4.5V or 5V

Protection level: IP34

Working current: less than 120mA Working current: less than 120mA

Standby current: less than 0.5mA

Optical control circuit: ambient illumination is less than 1Lux, into standby mode.

Light source material: LED

Color temperature value: 2820K-3200K

Maximum luminous flux: 45Lm

Work environment

Working temperature: -5 C ~ 50 C

Storage temperature: -5 C ~ 50 C

note

Sensor mode works only in dark environments.When the battery power is low, the sensor will become dull, please replace the battery in time; when not used for a long time, please remove the battery.