Portable Wireless LED Night Light Motion Sense Closet Cabinet LED Sensor Night Light

Sophisticated, high quality sensors ensure this efficient light only activates in the dark when there is motion nearby and then automatically shuts off after 15-30 seconds prolonging battery life.

Remove liner from one side of 3M pad to reveal sticky surface.

Stick 3M pad to the back of your night light

Remove remaining liner from 3M pad

Stick your night light anywhere you need light!

Or use the built-in magnet for metal surfaces.

Features:
100% New and high quality
Auto Light Control, when the light become dim in the room, this lamp will auto open and start of afford Soft Light
This can make bedtime less a fight and more of an enjoyable experience
Power saving
Perfect for Infants, Babies, Kids, Children, Toddlers as Sleep Light, Guide Light, Decorative Light in Kids Room, Bedroom, Bedside, Nursery, Bathroom, Hallway and more.
Also a good lover gifts for the one you care.

Installation method

1) Magnets can adsorb any place with iron.

2) Strong 3M glue fixation.

Product instructions

Battery: Use 3AAA or USB plug . (Note: USB can only be plugged in and does not charge batteries directly).

nstallation: Before installing the 3AAA battery, open the rear cover, then open the

battery cover, install the rear cover, and tighten the rear cover.

Lighting: This product is divided into scenario mode (Color) and white light mode (White). If

white light mode is used, please switch the switch to White position.

Mode: This product has constant brightness mode (On), night induction mode (Auto) and close (Off). If you use night induction mode, switch the switch to Auto position to meet different needs.

Data

Power of light source: 1W

Input voltage: DC 4.5V or 5V

Protection level: IP34

Sensor distance: 0m-4m

Illumination delay: less than 20s + 5S

Working current: less than 120mA Working current: less than 120mA

Standby current: less than 0.5mA

Optical control circuit: ambient illumination is less than 1Lux, into standby mode.

Light source material: LED

Color temperature value: 2820K-3200K

Maximum luminous flux: 45Lm

Work environment

Working temperature: -5 C ~ 50 C

Storage temperature: -5 C ~ 50 C

Note

Sensor mode works only in dark environments.When the battery power is low, the sensor will become dull, please replace the battery in time; when not used for a long time, please remove the battery.