Energy Saving Wireless LED Night Light Warm And Intelligent Motion Sensor

Wireless LED Night Light​ Features:

1. energy saving, use imported LED,365 days only need 1 degree.

2. warm and intelligent high-tech light +motion sensor.

3. battery powered

Wireless LED Night Light​ Features:

100% New and high quality
Auto Light Control, when the light become dim in the room, this lamp will auto open and start of afford Soft Light
This can make bedtime less a fight and more of an enjoyable experience
Power saving
Also a good lover gifts for the one you care.

Installation method

1) Magnets can adsorb any place with iron.

2) Strong 3M glue fixation.

Product instructions

Battery: Use 3AAA or USB plug . (Note: USB can only be plugged in and does not charge batteries directly).

nstallation: Before installing the 3AAA battery, open the rear cover, then open the

battery cover, install the rear cover, and tighten the rear cover.

Lighting: This product is divided into scenario mode (Color) and white light mode (White). If

white light mode is used, please switch the switch to White position.

Mode: This product has constant brightness mode (On), night induction mode (Auto) and close (Off). If you use night induction mode, switch the switch to Auto position to meet different needs.

Data

Power of light source: 1W

Input voltage: DC 4.5V or 5V

Protection level: IP34

Sensor distance: 0m-4m

Illumination delay: less than 20s + 5S

Working current: less than 120mA Working current: less than 120mA

Standby current: less than 0.5mA

Optical control circuit: ambient illumination is less than 1Lux, into standby mode.

Light source material: LED

Color temperature value: 2820K-3200K

Maximum luminous flux: 45Lm

Work environment

Working temperature: -5 C ~ 50 C

Storage temperature: -5 C ~ 50 C

Note

Sensor mode works only in dark environments.When the battery power is low, the sensor will become dull, please replace the battery in time; when not used for a long time, please remove the battery.