4WRZ16E3-180-7X/6EG24N9EK4/M 4WRZ16E3-180-7X/6EG24N9K4/D3M 4WRZ16E3-180-7X/6EG24N9K4/M Rexroth Germany hydraulic proportional electromagnetic electro-hydraulic valve imported
| Parameter Item | Details |
| Product Name | Pressure Relief Valves |
| Brand Name | Rexroth |
| Dimension (L*W*H) | 20*10*20 (Unit not specified, recommended to add mm/cm) |
| Weight | 1.5 (Unit not specified, recommended to add kg) |
| Warranty | 1.5 Year |
| Maximum Flow Rate | 60 L/min |
| Maximum Pressure | 315 bar |
| Pressure | System Pressure / 315 bar |
| Power (W) | 0.5 W |
| Structure | Inside |
| Showroom Location | None |
| Certification | 3CE (Note: Standard certification is CE; confirm if it's a typo) |
| MOQ | 1 Pc |

| 4WRZ32W6-360-7X/6EG24N9K4/D3M |
| 4WRZ32E3-360-7X/6EG24N9K4/M |
| 4WRZ32E3-520-7X/6EG24N9TK4/M |
| 4WRZ32E3-520-7X/6EG24N9ETK4/D3M |
| 4WRZ32E3-520-7X/6EG24N9ETK4/M |
| 4WRZ32E3-520-7X/6EG24N9EK4/D3M |
| 4WRZ32E3-520-7X/6EG24N9K4/D3M |
| 4WRZ32E3-520-7X/6EG24N9K4/M |
| 4WRZ32E3-360-7X/6EG24N9TK4/D3M |
| 4WRZ32E3-360-7X/6EG24N9TK4/M |
| 4WRZ32E3-360-7X/6EG24N9ETK4/M |
| 4WRZ32E3-360-7X/6EG24N9EK4/D3M |
| 4WRZ32E3-360-7X/6EG24N9EK4/M |
| 4WRZ32E3-360-7X/6EG24N9K4/D3M |
| 4WRZ32W6-360-70/6EG24N9ETK4/M |
| 4WRZ32E3-520-70/6EG24N9K4/M |
| 4WRZ32W6-360-70/6EG24N9EK4/D3M |
| 4WRZ32W6-360-70/6EG24N9EK4/M |
| 4WRZ32W6-360-70/6EG24N9K4/D3M |
| 4WRZ32W6-360-70/6EG24N9K4/M |
| 4WRZ32E3-520-70/6EG24N9TK4/D3M |
| 4WRZ32E3-520-70/6EG24N9TK4/M |
| 4WRZ32E3-520-70/6EG24N9ETK4/D3M |
| 4WRZ32E3-520-70/6EG24N9ETK4/M |
| 4WRZ32E3-520-70/6EG24N9EK4/D3M |
| 4WRZ32E3-520-70/6EG24N9EK4/M |
FAQ;
| Cause | Solution |
|---|---|
| Electromagnetic Interference (EMI) affecting control signal | Install EMI filters on power supply; route signal cables separately from power cables; ensure proper grounding |
| Hydraulic oil contamination or low oil level | Replace oil and filters; top up oil to recommended level; flush system if necessary |
| Pressure compensator malfunction | Disassemble and clean compensator; replace worn spring or seals |
| Internal or external oil leaks | Replace damaged seals; tighten loose fittings; repair or replace leaking components |
| Unstable control signal from PLC/DCS | Test signal with an oscilloscope; check controller settings; replace faulty signal cable |