Gas heaters are robust, efficient, and pure. Quartz is the only material to contact gasses being heated, which prevent particle adders and contaminates. Their reliable, robust design consists of heavy-gauge heater elements affixed to the outer diameter of each quartz tube along with over-temperature sensors. The heaters are available in various sizes, wattages, and in single-tube or double-tube configurations. Single or double-tube configurations allow for a wide range of temperatures and flows. Double-tube configurations allow for high flows, almost a doubling of a single-tube configuration. Flexible controls are also available to monitor and adjust the heater element temperature for low flow, intermittent applications. Power Modulators may be purchased separately to protect the heater against low-no flow conditions.

• Semiconductor Fabrication
• Solar Cell Manufacturing
• Flat-Panel Display, LEDs & Electronics
• Chemicals Manufacturing
• Industrial Manufacturing

Applications

Ultra-High-Purity Heating
Designed with Ultra-High-Purity processes in mind, Surplus delivers clean-room assembled, reliable heating and power solutions to fit specific needs.

FAQ

What To Do If Your Shipment Is Damaged:

Leave the items, packing material, and carton “as is”. Notify your carrier’s local office and ask for immediate inspection of the carton and its content. After inspection has been made by the carrier, and you have received acknowledgment in writing as to the damage, please contact our Customer Service Department at +86-13560811662 for return authorization. If writing for return authorization, please indicate your purchase order number. We will repair or replace the merchandise depending on the extent of the damage. It is your responsibility to follow the above instructions, or the carrier will not honor any claims for damage. If there are any shortages or questions regarding this shipment, please notify us within ten (10) days.

Safety Precautions

Every effort has been made to insure that this unit will run with a minimum of user input or maintenance. However, there are still precautions to be taken whenever operating, performing maintenance, or servicing this unit. This unit makes use of heating elements and electrical components, both of which pose inherent burn, fire, and electrical shock hazards. These hazards can result in injury to personnel, plant, and/or process. Please note the following to aid in the operation of your unit and to decrease risk of the above mentioned hazards.

Precautions

• Carefully and completely read this and all accompanying literature to verify that you understand the functionality and features of this system. Please become familiar with the integral safeties and controls within this system, and know their function.

• Always disconnect electrical power prior to installing, servicing or replacing electric heating elements and/or assemblies.

• Electrical termination enclosures should be selected to match the application’s environment and be able to withstand worst-case failures, especially in hazardous locations