Product name: Battery Altitude Simulation Tester
 Model number: GX-3020-ZC50
 Equipment description
 This equipment is used for battery high-altitude and low-pressure simulation test. The batteries are tested under the negative pressure of 11.6kPa (1.68psi) for 6 hours. The tested battery can not be exploded, no fire, no smoke, no leakage. To be qualified. The equipment can automatically control the test period (for example, 6H), and real-time monitor the pressure change in the tank, Can realize automatic termination of the test process.
Specifications
| Inner box material | SUS304# First grade stainless steel, thickness 6mm | 
| Outer box material | Cold rolled steel sheet baking treatment | 
| Pressure range | 0.5~100Kpa, commonly used test pressure 11.6 Kpa | 
| Storage partition material | SUS304# first grade stainless steel round bar | 
| Observation window | Double tempered glass, size: 250*250*5 mm, internal glass with explosion-proof membrane, Square anti-projection net installed between double glass | 
| control method | PLC man-machine interface control | 
| Vacuum display | SMC digital display vacuum gauge | 
| Timing control | Input settings on the PLC interface, freely set in 0-9999H (H/M/S seconds can be switched) | 
| Pressure fluctuation | ≤5% | 
| Pressure preservation time | 5% reduction in 26 hours | 
| Safety device | Overcurrent protection fuse, built-in pre-overvoltage safety device, use pressure reducing valve to achieve over-voltage safety protection, automatic operation or automatic alarm after timing | 
| net weight | 150KG | 
| Equipment using power | 3∮, AC220V±10%, 50Hz, 10A, | 
| equipment power | 2.5KW | 
| External use of gas source | 0.6~0.8MPA | 
