ZIKUN ONU Factory manufacturer ZC-500WT GPON XPON CATV ONT with 1GE 3FE WIFI WDM AGC
ZC-500WT is a dual-mode(XPON) optical network terminal (ONT) supports automatic switching between GPON and EPON modes, is designed for the fiber to the home (FTTH) scenarios. ZC-500WT complies with the ITU-T G.984/G.988 standard and IEEE802.3ah Standard, It has 10Mbps/100Mbps/1000Mbps adaptive GE interfaces, complying with IEEE802.3-2005 standards. The device offers 1* GE+3FE,1CATV RF and 2*2 11n wifi. It can provide serivces for Catv Video,IPTV Video and highspeed internet access.

| GPON interface (NNI ):1 x PON interface+WDM+AGC |
| Optical port | GPON/EPON mode adaptive ITU-T G.984/G.988 GPON standards,Support for backward compatibility with IEEE 802.3ah EPON Single mode fiber |
| Optical connector | SC/APC |
| Receiving Sensitivity | -28dBm;CATV Optical Receiver(1550nm):-18dBm |
| Overload optical power | -8 dBm;CATV Optical Receiver(1550nm):+2dBm |
| Transmitting Optical Power | 0.5~4dBm |
| Transmit rate | GPON:2.488Gbps downstream; 1.244Gbps upstream EPON:1.25Gbps downstream;1.25Gbps upstream |
| Wavelength | Receiving(DOWN):1490nm;Transmitting(UP):1310nm Third party wavelength(CATV Optical Receiver):1550nm |
| WDM | 1490/1310nm+1550nm |
| AGC | +2~-7dBm/-4~-13dBm/-5~-14dBm |
| User Network Interface (UNI ):1GE+3FE+1CATV+WIFI |
| | Ethernet port-based VLAN tags and tag removal |
| VLAN transparent and aggregation |
| MAC address learning |
| Auto-adaptive 10 Mbit/s, 100 Mbit/s or 1000 Mbit/s |
| | IEEE 802.11 b/g/n |
| 2 × 2 MIMO |
| Antenna gain: 5 dBi,two external antenna |
| Air interface rate:300 Mbit/s |
| Multiple SSIDs |
| | CATV Interfce:RF output,-5 Male F-Type Connector |
| RF frequency:47MHz~1000MHz |
| RF output lever:≥ 80dBuV(-7dBm optical input) |
| Optical reflection loss: ≥45dB |
| MER: ≥32dB(-14dBm optical input), >35(-10dBm) |
| RF impedance:75Ω |
| Product Function |
| | ITU-T G.984.1-4 |
| ITU-T G.988 |
| 32 TCONTs /256GEM ports |
| 8 Egress queues per TCONT at least |
| VLAN or VLAN plus priority gem mapping mode |
| Performance monitoring: eth/Gem port |
| Dying gasp |
| | MAC learning (SVL)/aging |
| Support max frame length to 1518 bytes |
| VLAN tagging for untagged packets |
| Support VLAN 1-4094 |
| VLAN transparent/translation |
| | PPPoE/Static IP/DHCP/Static IP/Bridge |
| NAT/NAPT |
| Port forwarding |
| ALG, UPnP |
| DDNS/DNS server/DNS client |
| IPv6/IPv4 dual stack,and DS-Lite |
| Static/Default routes |
| Multiple services on one WAN port |
| RIPv2 with passive mode |
| | IGMP v2 (RFC 2236) and IGMP v3 (RFC 3376) |
| IGMP snooping and IGMP Proxy |
| MLD v1/v2 |
| | Support 8 Queues with Strict Priority |
| Ethernet port rate limitation |
| 802.1ppriority |
| SP/WRR/SP+WRR |
| Service flow classification |
| | Firewall |
| MAC/Port/URL Filter |
| | OMCI/OAM/TR069 |
| Web UI(Http by LAN-Side and WAN-Side) |
| Telnet(Telnet by LAN-Side and WAN-Side) |
| Manage the CATV RF Port in OLT(Disablel/Enable the CATV RF Port) |
| SSH management with CLI commands |
| Physical Performance |
| Weight | About 400g |
| Working temperature | 0°C ~ 45°C |
| Working humidity | 5% RH to 95% RH (non-condensing) |
| Power adapter input | 100–240 V AC, 50 / 60 Hz |
| System power supply | 12V DC, 1 A |
| Power consumption | <6W |
| System Configuration |
| Main Chip | ZTE ZXIC ZX279127@800Mhz |
| RAM | 256MB |
| Flash | 256MB |
| WiFi Chip | MTK MT7603 |