Descriptions:
- KCO-ODP-12W 12core Fiber Optic Distribution Splitter Termination Box is able to hold up to 12 subscribers.

- It is used as a termination point for the feeder cable to connect with drop cable in FTTx network system.

- It integrates fiber splicing, splitting, distribution, storage and cable connection in one solid protection box.

Application
- Widely used in FTTH access network
- Telecommunication networks
- CATV networks
- Data communication networks
- Local area Networks

- Wall mounting and pole mounting installation

Features
- Industry standard user interface, be made of high impact plastic
- Anti-UV, ultra violet resistant and rainfall resistant
- Suitable for SC, FC or ST, duplex LC, or E2000 adapter
- Wall and pole mountable
- 2 inlet ports, 12 outlet ports

- Can uploard 12 pcs of FC, SC, ST or E2000 simplex adapter or 12 pcs of LC duplex adapter.

- Can install 1 pc of 1*12 PLC splitter, or 1 pc of 1*8 PLC Spltiter or 2 pcs of 1*6 PLC splitter or 3 pcs of 1*4 PLC Splitter or 6 pcs of 1*2 PLC Splitter.

- Made by ABS + PC high quality platics, longer time life.

- IP67 Water-proof Level, suiable to istall outdoor.

Products photos:
The distibution box is made by ABS & PC to splice and connect fibers in FTTX network system, and it uses key and buckles to close the box, and there is waterproof seal rubber around of the cover. All these designs keep the box sealed and the IP level is IP67.

There are 1 pcs splice tray and one adapter panel which can install max. 12 pcs SC simplex adapters (LC FC MT is optional).

At the bottom of box, it is designed to coil and store fibers. The whole box is able to hold up to 12 subscribers.

The adapter plate can accommodate max. 12 pcs SC adapters, working with 1 pcs splice tray which can be flipped up for 12 splicing fibers.

The metal parts are stainless steel which is used to fix the fiber optic cable.This box has 12 outlets protected by PE waterproof sealing ring for drop cable. The inlet or outlet cable can be fixed by the metal rack, and the distribution box can be installed on wall or pole with metal hoop and anti-rusting bolts, nuts.

Technical data:

Work temperature: -40℃~+85℃

Relative humidity: ≤85%(+30℃)

Insert loss: ≤0.2dB

Return loss APC: ≥55dB

UPC: ≥50dB

Atmospheric pressure: 70Kpa~106Kpa

Return loss insert end: ≥60dB

Pull out life insulation: ≥1000times