Motorized Vehicle Access MX-30 Automatic Parking Barrier Gate with straight arm

Product parameters:

HOW TO USE?

• Please select the right type of the barrier gates according to the specifications of the place.Fix the barrier gate case board with expansion bolts.

• Fix the boom to the boom tray with the boom press board, then cover the boom capuche with the screws.

• After that ,fix the cover of the boom to the splint and fasten them with four screws of 4*16, and slip the cover tap with the cover by two 3*10 screws.

• Unlock the clutch device with the clutch key clockwise .Move the boom to the horizontal and vertical manually to make sure there is no obstruction.Then turn on the power .

Common malfunctions and solutions:

1. Motor works but there is no reacion on the arm;
a. Please check whether the clutch device is locked or not.

2.The boom could not rise up or fall down to the end;
a. When change a long boom to a short one, please readjust it ,
b. The sensor dose not plug well, please check it.
c. The "Speed adjust switch" is wrong adjust, please readjust it.

3. There is no reaction when pressing the remote controller buttons,
a. Please check whether the power is supplied to the barrier gate or not,
b. Please check whether the fuse is burnt out or not
c.Please check whether the code both in the remote controller and the controller board are accordant or not

Why choose us?

1.One year's free servicing is supplied( not including the arm)
2. Lifetime charged servicing is offered.
3. Technology servicing is supplied
The following situations are charged for servicing (or changing):
1. Broken by wrong installation.
2 Broken by improper voltage.
3. The surfaces of the system destroyed by wrong installation our use.
4. Broken by natural disaster.
5. Overdue
6. Servicing items out of our promises.
The upgrade and improvement of the product won't be notified if there is any.
The explaining authority of this product instruction and service article belong to the production factory.