One-Stop Engineering & Manufacturing Capabilities

Customization and R&D Capability

Our engineers custom-develop the control board and its firmware for your equipment, so the I/O, protocol and control logic fit your machine and its working environment.

• ODM design-in — MCU/MPU, I/O and isolation architecture tailored to your I/O count and cycle time.
• Hardware and firmware co-development — control circuitry and real-time firmware tuned together.
• Industrial robustness engineering — surge, ESD, thermal and EMC design for harsh factory conditions.
• Feature expansion — add fieldbus, HMI, analog I/O or motion control to your platform.
• Confidential development — NDA-protected engineering with clear design ownership for your brand.

Cost Reduction and Efficiency for Your Project

We do more than populate boards — we lower your total cost and shorten your time to market.

From Bare Board to Finished Product (Box-Build)

A bare PCBA is only a component. This service carries the board all the way into a finished industrial product that ships ready to sell.

1. Schematic Design — lock the electrical architecture.
2. PCB Layout — deliver a manufacturable, robust and EMC-conscious board.
3. Component Sourcing — secure the BOM through trusted channels.
4. DFM / DFA Review — de-risk the build before tooling.
5. SMT and DIP Assembly — populate and solder the PCBA.
6. Firmware Development — bring the control logic to life.
7. Functional Testing — verify every function passes.
8. Box-Build Assembly — fit the PCBA into the enclosure, wire harnesses and connectors, then seal and finish the unit into a complete product.
9. Prototype and Mass Production — start with samples, then ramp to volume with the same process.