One-Stop Engineering & Manufacturing Capabilities

Customization and R&D Capability

We are not a copy shop. Our engineers custom-design the board and firmware around your application, so the hardware fits your product instead of forcing your product to fit the hardware.

• ODM design-in — tailored MCU, radio and sensor selection for your IoT use case.
• Hardware + firmware co-design — the board and code are developed together for stable connectivity.
• Industrial design and enclosure integration — board outline, mounting and connectors planned around the housing.
• Feature expansion — add displays, sensors, wireless modules or secure elements to an existing design.
• IP-aware engineering — NDA-protected development with clear design ownership.

Cost Reduction and Efficiency for Your Project

Beyond building the board, we actively cut your total cost and shorten your time to market.

From Bare Board to Finished Product (Box-Build)

A bare PCBA is only a component. This service follows the board all the way into a finished unit that ships ready to sell — not a loose board.

1. Schematic Design — lock the electrical architecture.
2. PCB Layout — deliver a manufacturable, RF- and EMC-conscious board.
3. Component Sourcing — secure the BOM through trusted channels.
4. DFM / DFA Review — de-risk the build before tooling.
5. SMT and DIP Assembly — populate and solder the PCBA.
6. Firmware Development — bring the board to life.
7. Functional Testing — verify every function passes.
8. Box-Build Assembly — fit the PCBA into the enclosure, wire harnesses and connectors, then seal and finish the unit into a complete product.
9. Prototype and Mass Production — start with samples, then ramp to volume with the same process.