One-Stop Engineering & Manufacturing Capabilities

Customization and R&D Capability

Our engineers custom-develop the LED control board and its firmware for your luminaire, so the driver, dimming behavior and controls fit your fixture and market requirements.

• ODM design-in — drive topology, LED string and controller tailored to your wattage and efficiency targets.
• Hardware and firmware co-development — constant-current stage and dimming firmware tuned together for flicker-free output.
• Control protocol engineering — DALI, 0-10V, PWM, Zigbee, BLE or Matter control stacks as required.
• Feature expansion — add color tuning, occupancy sensing or smart-home integration to your platform.
• Compliance support — design aligned for CE, UL, RoHS and energy-efficiency requirements.

Cost Reduction and Efficiency for Your Project

We do more than populate boards — we lower your total cost and shorten your time to market.

From Bare Board to Finished Product (Box-Build)

A bare PCBA is only a component. This service carries the board all the way into a finished lighting product that ships ready to sell.

1. Schematic Design — lock the electrical architecture.
2. PCB Layout — deliver a manufacturable, thermal and EMC-conscious board.
3. Component Sourcing — secure the BOM through trusted channels.
4. DFM / DFA Review — de-risk the build before tooling.
5. SMT and DIP Assembly — populate and solder the PCBA.
6. Firmware Development — bring the dimming and controls to life.
7. Functional Testing — verify every function passes.
8. Box-Build Assembly — fit the PCBA into the enclosure, wire harnesses and connectors, then seal and finish the unit into a complete product.
9. Prototype and Mass Production — start with samples, then ramp to volume with the same process.