One-Stop Engineering & Manufacturing Capabilities

Customization and R&D Capability

Our engineers custom-develop the control board and its firmware for your smart-home product, so the electronics fit your design language and feature set — not the other way around.

• ODM design-in — MCU, radio and sensor architecture tailored to your use case and market.
• Hardware and firmware co-development — board and code built together for reliable connectivity and app integration.
• Enclosure-aware layout — board outline, antenna clearance and connectors planned around the housing.
• Feature expansion — add sensing, displays, voice modules or secure elements to an existing platform.
• Confidential development — NDA-protected engineering with clear design ownership for your brand.

Cost Reduction and Efficiency for Your Project

We do more than populate boards — we lower your total cost and shorten your time to market.

From Bare Board to Finished Product (Box-Build)

A bare PCBA is only a component. This service carries the board all the way into a finished smart-home unit that ships ready to sell.

1. Schematic Design — lock the electrical architecture.
2. PCB Layout — deliver a manufacturable, RF- and EMC-conscious board.
3. Component Sourcing — secure the BOM through trusted channels.
4. DFM / DFA Review — de-risk the build before tooling.
5. SMT and DIP Assembly — populate and solder the PCBA.
6. Firmware Development — bring the board to life.
7. Functional Testing — verify every function passes.
8. Box-Build Assembly — fit the PCBA into the enclosure, wire harnesses and connectors, then seal and finish the unit into a complete product.
9. Prototype and Mass Production — start with samples, then ramp to volume with the same process.