Chamfering Machine for Engine Valve manufacturing

The chamfering machine is used to chamfer the valve raw material after punching and cutting. Related process requirements.

Performance Parameters of Chamfering Machine

1. The Chamfering Machine can process valve rods with a diameter of 5mm to 9mm.

2. The Chamfering Machine must be able to make valves with a rod length of 110mm to 350mm.

3. Cycle time is 2PCS/S; (valves with a rod diameter ≤7mm)

4. The changeover adjustment time is ≤15 minutes.

5. The chamfering depth is adjustable, 0.5~2mm, and the angle is 30-40 degrees.

6. The equipment adopts a double-screw feeding method during operation, and the feeding speed is adjustable (servo motor driven)

7. The equipment adopts the working mode of automatic feeding and discharging mechanism, and the feed hopper can put 1500 ∅5.3 rods at a time.

8. The equipment uses V-belt discharging, and is equipped with a robot system for automatic unloading and boxing.

9. The equipment should be equipped with an industrial dust removal system, and the air volume of the dust collector should not be less than 3000 cubic meters/hour, keeping the guide rails, contact surfaces and the surrounding area of ​​the equipment clean.

10. Automatic fault alarm system.
11. Product counting function with counter.
12. The equipment has complete protection functions to avoid mechanical damage to operators.
13. Electrical components, relays and contactors are selected from Schneider brand; ~
14. The inverter is selected from Delta inverter.
15. PLC is selected from OMRON
16. Cylinder is selected from SMC
17. Valve is selected from smc. Row installation, wiring is plug-in type
18. Sensor is selected from IFM
19. Touch screen is selected from KINCO or Pro-face.
20. Safety PLC is selected from Omron G9SP

Our service for Ulrasonic Testing Machine

1. Automation solution design and consulting
2. Automation equipment supply and integration
3. Software development and system integration
4. After-sales support and maintenance
5. Training and knowledge transfer

Feature picture of Chamfering Machine