0.6/1kV EPR/CSPE Rubber Cable for Cathodic Protection Systems
Product Overview
Class 5 stranded tinned copper wires designed specifically for cathodic protection systems in industrial applications.
Key Specifications
Rated Voltage
0.6/1kV
Conductor Material
Copper
Insulation Material
EPR
Working Temperature
-40℃ to +90℃
Jacket
EM7 type cross-linked elastomeric compound
Application
Industrial
Type
Low Voltage
Brand Name
Minfeng
Cable Structure
- Conductor: Electrolytic annealed, class 5 stranded tinned copper wires
- Separator: A suitable tape may be applied over the conductor
- Insulation: EL4 type cross-linked elastomeric compound, EPR (EN 50363-1)
- Sheath: EM7 type cross-linked elastomeric compound (EN 50363-2-1)
- Color: Black
Main Characteristics
- Construction: Based on EN 50525-2-21, IEC 60502-1, BS 7655-1.2, IEC 60245-4
- General Requirements: EN 50363-2-1
- Guide to Use: EN 50565-1/2, VDE 0298-565-1
- Electrical Tests: EN 50395, IEC 60245-2
- Non-electrical Tests: EN 50396, IEC 60245-2
- Conductor Resistance: IEC 60228, VDE 0295
- Flame Retardant: IEC 60332-1-2, VDE 0482-332-1-2
- Oil Resistant: VDE 0473-811-404, EN 60877-404
Operating Characteristics
- Rated Voltage: 600/1000V (Uo/U)
- AC Test Voltage: 4 kV
- Operating Temperature: -40℃ to +90℃
- Conductor Short-Circuit Temperature: 250℃ (Max. 5 sec.)
- Minimum Installation Temperature: -25℃
- Minimum Bending Radius: Based on EN 50565-7 Table 3
- Current Carrying Capacities: VDE 0298-4 Table 13, IEC 60364-5-52 Table B.52.12 & Table C.52.1
Technical Specifications
| Cross Section (mm²) |
Nominal Overall Diameter (mm) |
Approximate Weight (kg/km) |
Min. Bending Radius (mm) |
Max. Resistance at 20°C (ohm/km) |
| 1x10 |
1,150 |
215 |
195 |
35 |
| 1x16 |
1,300 |
296 |
124 |
52 |
| 1x25 |
1,560 |
429 |
795 |
62 |
| 1x35 |
1,650 |
531 |
565 |
66 |
| 1x50 |
1,780 |
674 |
393 |
71 |
| 1x70 |
1,970 |
880 |
277 |
79 |
| 1x95 |
2,210 |
1130 |
21 |
88 |