NGFLGOEU Low Voltage Flat Cable for Festoon Application 300/500V Copper Conductor PROTOLON Insulation Application Flexible low voltage power and control cable, for use on festoon systems and for connecting moveable parts of machine tools, material handling equipment, etc., associated with high mechanical stresses and frequent bending during operation and for bending in one plane only. Design features Conductor:Eletrolytic copper, not tinned: -up to 25 mm²: extremely finely stranded, class 6 -above 35 mm²: finely stranded, class 5 Insulation:PROTOLON Basic material EPR, Rubber compound 3GI3 (refer also to DIN VDE 0207, Part 20) Core identification:Up to 5 cores, colored: green/yellow (or black for version...-O) black, blue, brown, grey; For more than 5 cores: black with white colored numbers Individual screen Braid screen made of tinned copper wires, transfer impedance optimized at 30 MHz. Surface covered: approx. 60% for shielded cores, approx. 80% for twisted and shielded pairs. Core arrangement:Parallel, for more than 12 cores: parallel bundles Outer sheath Basic material CR, Rubber compound 5GM3 (refer also to DIN VDE 0207, Part 21) Colour: black Marking PLANOFLEX NGFLGOEU-J/-O (number of cores)x(cross-section) 600V, 90°C, (UL), PLANOFLEX (cross-section) AWG/(number of cores)(type of core) OUTDOOR Electrical parameters Rated voltage:300/500V (600V) Max. permissible operating voltage AC:0.7/1.2 kV Max. permissible operating voltage DC:0.9/1.8 kV AC Test Voltage:2.5 kV (5 Min.) Current Carrying Capacity description:Acc. to DIN VDE 0298-4 Chemical parameters Resistance to oil:Acc. to DIN VDE 0473-404, paragraph 10 Weather resistance:Unrestricted use outdoors and indoors, resistant to ozone, UV and moisture. Thermal parameters Max. permissible temperature at conductor:90 °C Max. short circuit temperature of the conductor 250 °C Ambient temperature for fixed installation:min -50 °C ; max +80 °C Ambient temperature in fully flexible operation min -35 °C ; max +80 °C Mechanical parameters Max. tensile load on the conductor:15 N/mm² Torsional stress:Not allowed Min. bending radius:Acc. to DIN VDE 0298 part 3 Travel speed:- Gantry (reeling operation): no application; -Trolley (festoon system): guidance value up to 180m/min (it is recommended to consult the manufacturer for speeds beyond 180m/min). Additional tests:Bending test