19 Wires Steel Wire Rope For Brake Cable 1x19 1.6mm 1.8mm 2.0mm 2.5mm 3.0mm Galvanized Steel Cable

1x19 is a structural model of steel wire rope, where "1" represents that the steel wire rope has only one strand, and "19" represents that this strand is twisted from 19 steel wires. Galvanizing refers to the process of hot-dip galvanizing or galvanizing the surface of steel wire to form a protective layer of zinc.

• High strength and low flexibility: 19 steel wires are tightly twisted, and the overall rigidity of the steel wire rope is strong, not easy to bend, and can withstand large axial tensile forces. It is suitable for scenarios that require high rigidity such as cable pulling and tensioning ropes.
• Strong corrosion resistance: The galvanized layer isolates the steel wire from contact with air and moisture. In humid, outdoor, and even mild acidic and alkaline environments, the service life of the steel wire rope is 2-3 times longer than that of a smooth steel wire rope.
• Structural stability: The single strand structure avoids the problems of inter strand wear and wire breakage that are prone to occur in multi strand steel wire ropes, and is not easily deformed after long-term stress.
• Precision controllable: The diameter and twist length of the steel wire can be precisely controlled during the production process, which can meet the engineering requirements for high straightness and dimensional accuracy.

Common uses of 1x19 structure, 1.0-3.5mm diameter galvanized steel wire rope:

• Construction project: Glass curtain wall cables, cable-stayed bridge suspension rods, steel structure support ropes
• Lifting equipment: Fixed ropes for small cranes, steel wire ropes for elevator speed limiters
• Outdoor facilities: Tensioned membrane structure for sports venues, fixed cables for billboards
• Fishery aquaculture: Deepwater net cage fixed rope, aquaculture facility support structure

Our steel wire rope meets international production standards and has obtained multiple certifications: