Casambi App Setting 0-10V Wireless PIR Motion Sensor for High Bay

【Product Feature】

• 12Vdc Input, suitable for DC systems or LED driver with 12V DC auxiliary power output.
• 0--10V dimming terminal, 3-step or 2-step is optional, detection area adjustable
• Mini size MW motion detection sensor
• Indoor maximum mounting height is 15m
• All sensor parameters can be set by Casambi App setting

【Parameters】

【Function Description】

【Product Information】

• Dimension (Unit:mm)

​

• Function

【Installation Instruction】

【Detection Range】

【Initialization】

• After switch on power, sensor will be warmed 45-60s then start to work. During initialization, the sensor is not able to detect movement.

【Default setting】

Sensitivity: 100%, Hold time: 10s, Daylight sensor: Disable, Stand by period: 0s, Stand by DIM level: 10%

【Application Notice】

• The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring and changing parameters.
• PIR sensor can’t penetrate any materials, please make sure no obstacle between sensor and moving people/object.
• Sensor may hard to detect people if wear thick clothes in cold winter.
• Heat signals will be regarded as moving signals to trigger the sensor. Avoid facing sensor to air condition or other heating source.
• Sensor is for indoor use only. Outdoor sunlight could affect the detection of sensor.
• Due to continuous improvement, the contents of this instruction could be changed without prior notice.
• The dimming performance could be different when work with different 0-10V drivers.
• The daylight threshold is measured in a sunny environment without shadow and ambient light diffuse reflection. Ambient lux level could be different in different environment, weather, climate, time-of-day and season.
• Detection distance is related to height of people, mounting height, mounting angle, working environment etc.
• Given detecting area is typical value that was measured by 165cm high testers in an indoor open environment.
• This product have to use with voltage-stabilized DC power supply whose input voltage is stable and ripple factor is low(ripple factor is lower than 100mV; load current is greater than 100mA).
• When installing in new environment, please install and test at least 5pcs product firstly before mass installation.