10m mounting height 12Vdc dry contact infrared pir motion sensor detector IP20
  
  
 1. Features
 1) PIR motion detection
 2) Accurate NO/NC dry contact output
 3) Daylight sensor detection is available
 4) Detection area, hold time, and daylight threshold can be set by remote/DIP switch
 5) Max detection range: 8-10m in diameter
 6) 10m max mounting height
 7) Warehouse, workshop, and lobby motion detection is highly recommended
  
 2. Parameters
| Input/Output | Input voltage | 12-24V DC | 
| Rated voltage | 12/24V DC | |
| Working current | 20mA max | |
| Power consumption | ≤0.5W @12/24V DC | |
| Output signal | NO/NC dry contact (Factory setting is NO dry contact) | |
| Sensor parameter | Function | PIR motion detection+ daylight sensor | 
| Detection Area | DIP or remote setting: 100%/75%/50%/25% | |
| Hold Time |  			 DIP: 5s/1min/3min/5min/10min/20min/30min MH10remote:5s/30s/1min/3min/5min/10min/20min/30min  |  		|
| Daylight Sensor |  			 DIP: 5Lux/50Lux/150Lux/Disable MH10remote: 5Lux/15Lux/30Lux/50Lux/100Lux/ 150Lux/Disable  |  		|
| Radius detection range(based on 100% sensitivity) | 4-5m based on 10m mounting height | |
| Remote control | Available | |
| Mounting height | typical value:10m | |
| Application environment | Drill hole | Φ65-70mm | 
| Working temperature | 0℃...+35℃ | |
| Storage temperature | -40℃~+80℃ | |
| Certificate Standard | Certificate | Compliant to CE | 
| Environmental requirements | Compliant to RoHS | |
| IP rating | IP20 | |
| “N/A” means not available | ||
3. Dimension
  


4. Wiring Diagram
  


 5. Start Process & Initialization
  
 When powered on, the sensor indicator will turn off after flashing for 10S and will not detect a moving signal during this time. After 10S,you can use our MH10 remote or dip switch to adjust detection area, hold time, daylight sensor, etc
  
 6. Factory Settings
  
 Detection Area: 100% Hold Time: 5s Daylight Sensor: Disable
  
 7. Detection radiation

 8. DIP Settings
  
Detection Area
| 1 | 2 | |
| 100% | ON | ON | 
| 75% | - | ON | 
| 50% | ON | - | 
| 25% | - | - | 
 
  
                                                                                         Hold Time
  
| 3 | 4 | 5 | 6 | ||
| Ⅰ | ON | ON | ON | ON | 5S | 
| Ⅱ | ON | - | ON | ON | 1min | 
| Ⅲ | ON | ON | - | ON | 3min | 
| Ⅳ | ON | ON | ON | - | 5min | 
| Ⅴ | ON | ON | - | - | 10min | 
| Ⅵ | - | - | ON | ON | 20min | 
| Ⅶ | - | - | - | - | 30min | 
   
  
                                                                                        Daylight Sensor
  
| 7 | 8 | ||
| Ⅰ | ON | ON | 5Lux | 
| Ⅱ | - | ON | 50Lux | 
| III | ON | - | 150Lux | 
| Ⅳ | - | - | Disable | 
 
        **Once the daylight sensor is set as Disable, our motion sensor will detect human movement regardless of the environment lux
  
 10. MH10 Remote Control
  
