BSD-78661A Universal Gear Oil Additive Package

Product Performance

BSD-78661A is composited of various high-quality extreme pressure agents, antioxidants, metal deactivators, rust inhibitors, and other additives. The formulated oil has excellent extreme pressure wear resistance, rust prevention, and corrosion resistance in applications, and can effectively protect the gear tooth surface from damage under harsh conditions. It has excellent scratch and sintering resistance, and prevents oil sludge deposition.

Product Features

●Meet the requirements of high-speed impact load, low-speed and high torque

●Wide corrosion protection range

●Excellent sealing adaptability

Recommended Dosage (wt%)

• API GL - 5 heavy load automotive gear oil 3.4%
• API GL - 4 medium load automotive gear oil 1.7%
• L-CKD Heavy load Industrial gear oil 1.3%
• L-CKC Medium load Industrial gear oil 1.1%

Typical Inspections

Product Appearance

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products;
• When adjusting oil, the maximum temperature should not exceed 75 ℃;
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).