BSD-78660 Universal Gear Oil Additive Package for GL-5, GL-4, CKC and CKD

Product Description

BSD-78660 is a high-efficiency composite additive package designed for automotive and industrial gear oil formulations. It combines imported sulfur-based anti-wear extreme pressure agents, a proprietary phosphorus-nitrogen core agent, high-quality oiliness agents, and rust inhibitors. Offering low dosage with high performance, BSD-78660 meets the GB 5903-2011 and NB/SH/T 0467-2010 industry standards. It is compatible with mineral oils of Groups I, II, and III, as well as synthetic oils such as PAO, and provides a low-odor formulation without unpleasant smells.

Recommended Dosage

• API GL-5 Heavy Load Automotive Gear Oil: 3.8%

• API GL-4 Medium Load Automotive Gear Oil: 1.9%

• CKD Heavy Load Industrial Gear Oil: 1.4%

• CKC Medium Load Industrial Gear Oil: 1.2%

Product Appearance

Packaging and Acceptance

• This product is packaged in standard iron drums, or in BIC ton drums or other packaging forms according to customer needs.
• Product identification, sample retention, and delivery acceptance shall be carried out in accordance with SH/T0164 standard.

Product Storage, Transportation, and Compounding Agent Blending Operations and Precautions

• The product shall be stored, loaded and unloaded in accordance with the SH/T0164 standard, and must be clearly labeled during transportation, storage and use to prevent mixing and cross contamination with other petroleum products.
• When adjusting oil, the maximum temperature should not exceed 75 ℃.
• Long term storage temperature should not exceed 50 ℃.
• Single dose and composite product shelf life: 24 months (at ambient temperature). After opening and using, pay attention to sealed storage.

Health and Safety

• The products in this manual are non flammable, non explosive, and non corrosive, and are similar to general petroleum products in terms of safety, environmental protection, and use.
• Avoid prolonged or repeated contact with the skin during use, prevent accidental ingestion, and keep away from children.
• Wear protective gloves when using, and the operator does not need to take special safety precautions. Once it splashes into the eyes or skin, rinse thoroughly with plenty of water.
• Store the product in a cool, dry, and well ventilated place, away from sources of fire. Heat source.
• Waste packaging materials, oil liquids, and waste residues should be handed over to qualified units for recycling and disposal, and are prohibited from being discharged into water bodies or soil.
• For other health and safety information, please refer to the Product Safety Data Sheet (MSDS).