JL-712A1H light-sensing, 0-10V, infrared remote control for roads, lawns, courtyards, parks, parking lots, factories, and warehouses.
The JL-712A1H light controller is a smart latch-type controller developed based on the Zhaga Book-18 interface standard. It combines light sensing and microwave sensing sensors, outputs 0-10V dimming signals, and supports infrared remote control for parameter configuration. Suitable for various lighting scenarios including roads, lawns, courtyards, parks, parking lots, factories, and warehouses.
Working logic: When illumination requirements are met, the lamp operates at slightly bright brightness and starts a countdown. If motion is detected, the lamp becomes fully bright. After motion detection ends, a full-brightness countdown begins. When this countdown ends, it returns to slightly bright mode. The lamp turns off when the slightly bright countdown ends or illumination requirements are no longer met.
| Power Supply | Voltage: 12-24VDC Current: ≥25mA |
|---|---|
| Power Dissipation | <0.3W (12V); <0.6W (24V) |
| Dimming | 0-10V |
| Sensors | Light sensitivity + microwave |
| Spectral Range | Wavelength: 800-1100nm |
| Microwave Frequency | 5.8GHz |
| Maximum Hanging Height | 12 meters |
| Induction Radius | 6-9 meters |
| Power On Initialization | Default remains on for 5s (gradient), then operates based on parameter settings and environment |
| Sensitivity | Default 80%, adjustable via IR |
| Hold Time | Default 30S, adjustable via IR |
| Stand-by Dim Level | Default 0%, adjustable via IR |
| Stand-by Period | Default infinite, adjustable via IR |
| Turn On Illuminance | Default 50lux, adjustable via IR |
| Turn Off Illuminance ∆ Value | Default ∆ 50lux, adjustable via IR |
| Turn Off Illuminance | Turn On Illuminance + Turn Off Illuminance ∆ Value |
| Maximum Power Ratio | Factory default 100%, adjustable via IR |
| Off → Stand-by Dim Time | 0.1S |
| Stand-by Dim → 100% Dim Time | 0.1S (when stand-by dim level is 0%, lasts 0.2s) |
| 100% Dim → Stand-by Dim Time | 8S (when stand-by dim level is 0%, lasts 9s) |
| Stand-by Dim → Turn Off Time | 1S |
| Mechanical Vibration | IEC60068-2-6 |
| Flammability Level | UL94-V0 |
| Operating Temperature | -40℃ to 70℃ |
| Storage Temperature | -40℃ to 85℃ |
| Operating Humidity | 5% RH to 96% RH |
| IP Level | IP66 |
| Certifications | CE, ZHAGA, ROHS |
A: It is a ZHAGA standard intelligent lighting controller equipped with light sensing function, 0-10V dimming output and infrared remote control, mainly used for outdoor lighting automatic control.
A: ZHAGA standard ensures high compatibility, plug-and-play installation, good waterproof performance and stable connection, which is convenient for installation and replacement on LED lamps.
A: It automatically senses ambient brightness, turns on the light at dusk and turns off at dawn, realizing fully automatic control without manual operation and effective energy saving.
A: Infrared remote control supports convenient on-site parameter adjustment, dimming setting, sensitivity adjustment and mode switching without disassembly or wiring.
A: It is widely used in roads, lawns, courtyards, parks, community lighting and other outdoor public lighting occasions.