Direct fit power tailgate conversion for the five seat Citroen C4 Picasso produced from 2013 to 2018. Compact MPVs of this generation were sold mostly with a manual hatch, and loading children, shopping or tools while holding the door open is awkward. This kit adds a motorised lift unit so the hatch opens on a key press and closes again with a second press, without altering the factory bodywork.

Product Highlights

• Auto Open Trunk Kit: the hatch releases and lifts itself from the remote, the dash button or the rear handle switch.
• Power Tailgate Upgrade Kit: includes the drive unit, vehicle specific brackets, control box, buzzer and plug in loom for a complete upgrade in one box.
• Aftermarket Power Tailgate Retrofit: engineered as an aftermarket solution with OEM style connectors, keeping the original latch and central locking behaviour intact.
• Contact reversal safety: the hatch stops and reopens when it meets an obstacle on the way down.
• Opening angle can be memorised so the door clears low ceilings in basement car parks.
• The factory manual release stays active, giving a fallback when the vehicle battery is drained.

Technical Data

Fitment Guidance

Brackets and loom are dedicated to the five seat C4 Picasso range from 2013 to 2018. The longer Grand C4 Picasso uses a different hinge distance and requires a separate kit, and the C4 Space Tourer that followed is also a distinct variant. Mechanics should compare the hinge pattern in the photo with the vehicle before starting, and our team can verify fitment from a VIN photo sent by chat.

Supply and Support

Each kit is palletised in a reinforced carton with foam corner protection and hardware packed in labelled bags. Units are bench tested for motor load, wiring continuity and sensor response before dispatch, and a 24 month warranty applies to the actuator, controller and sensor. Distributors can order spare actuators and brackets separately, and English installation notes plus a video link are included with every carton.