Tailgate automation kit for the Citroen C4 Cactus hatchback built from 2014 to 2017. The standard car relies on two small gas struts and a manual handle, which becomes tiresome in tight city parking where the door cannot swing freely. This conversion replaces the struts with a compact motorised actuator and adds a control module, giving owners electric opening and closing from the key, the dash or a foot gesture at the bumper.
| Parameter | Specification |
|---|---|
| Suitable For | Citroen C4 Cactus 2014-2017 |
| Body Form | Compact crossover hatchback |
| Voltage | 12V DC negative earth |
| Actuator Type | Brushless motor, threaded spindle |
| Full Cycle | About 7 seconds |
| Sensor Option | Under bumper kick strip |
| Anti Trap | Current based reverse with repeat protection |
| Ingress Rating | IP54 on actuator body |
| Bracket Coating | Zinc plated, 72 h salt spray tested |
| Kit Weight | Around 4.1 kg |
The bracket geometry and connector pinout in this set match the 2014-2017 C4 Cactus hatch only. Later facelift cars and other C4 family models such as the C4 Picasso or C4 Space Tourer use different hinge spacing, so please confirm the model year and, where possible, the chassis prefix before ordering. Sending a photo of the current strut mounting point is usually enough for our team to verify the correct variant.
Every set leaves the factory in a foam lined carton, with bolts and clips grouped in numbered bags that follow the manual sequence. Test routines cover actuator stroke under load, loom continuity and sensor response, and any unit failing a step is pulled from the batch. The product carries a 24 month warranty on the actuator, controller and sensor, and single components can be reordered to keep dealer stock flexible. Installation notes in English are included, and our engineers answer fitting questions by chat during working hours.