Technical parameter:
| Laser Generator | RF Laser tube | 
| Laser Power | 30W | 
| Control system | Ezcad control system | 
| Power supply | Hengfu Power supply | 
| Laser Length | 1064nm | 
| Quality of Lase Beam | m2<1.5 | 
| Laser Repetition Frequency | ≤100 KHz | 
| Standard Marking Area | 200×200mm | 
| Optical Marking Area | 110x110mm / 150x150mm | 
| Engraving Depth | ≤1.2mm | 
| Engraving Speed | ≤12000mm/s | 
| Minimum Line Width | 0.01mm | 
| Minimum Character | 0.05mm | 
| Resolution Ratio | ±0.001mm | 
| Gross Power | ≤500W | 
| Working Voltage | 220V /110V ,Signal phase , 50-60HZ | 
| Rotary | Option | 
| Computer | Lenovo computer | 
1. High-definition: the resolution is measured by micron; It is two times clearer that traditional machine.
2. Less power consumption: occapy traditional consumption of one and two-fifths to one and ten.
3. High-speed:the speed is three to five times faster than traditional machine.
4. Stability: the stability of machine is much better than similar counterpart.
5. Long life: its lifespan is ten times longer than traditional glass tube machine. 100000hours

