Technical parameter:
| Laser Generator | RF Laser tube |
| Laser Power | 30W |
| Control system | Ezcad control system |
| Power supply | Hengfu Power supply |
| Laser Length | 1064nm |
| Quality of Lase Beam | m2<1.5 |
| Laser Repetition Frequency | ≤100 KHz |
| Standard Marking Area | 200×200mm |
| Optical Marking Area | 110x110mm / 150x150mm |
| Engraving Depth | ≤1.2mm |
| Engraving Speed | ≤12000mm/s |
| Minimum Line Width | 0.01mm |
| Minimum Character | 0.05mm |
| Resolution Ratio | ±0.001mm |
| Gross Power | ≤500W |
| Working Voltage | 220V /110V ,Signal phase , 50-60HZ |
| Rotary | Option |
| Computer | Lenovo computer |
1. High-definition: the resolution is measured by micron; It is two times clearer that traditional machine.
2. Less power consumption: occapy traditional consumption of one and two-fifths to one and ten.
3. High-speed:the speed is three to five times faster than traditional machine.
4. Stability: the stability of machine is much better than similar counterpart.
5. Long life: its lifespan is ten times longer than traditional glass tube machine. 100000hours

