HbA1c Analyzer LD-560 Labnovation Latest Full Automated Analyzer HPLC Method IFCC&NGSP Certificated HbA1c Analyzer

Intended Use

The Fully Automated HbA1c Analyzer is used in conjunction with suitable reagents for the quantitative detection of glycosylated hemoglobin (HbA1c) in human blood.

Specifications

Principle

Using high performance liquid chromatography (HPLC), the stationary phase used is a weakly acidic cation exchanger. Glycosylation of hemoglobin will result in the loss of cations on the surface of hemoglobin without being charged, and non-glycosylated hemoglobin has a positive charge.

Feature

• No Sample Pre-treatment
• Fully automated operation saves time and labor
• Automatic Primary tube sampling with cap puncture
• Auto identificate the whole blood or lyse
• HPLC Method
• Batch sampling offer flexibility in workflow
• 90 Seconds per test

Reagents and Consumables

• Eluent A/Eluent B/Eluent C: Adjusts the pH of the solution for the elution of glycosylated hemoglobin and non-glycated hemoglobin.
• Hemolysis Reagent: Used to dissolve red blood cells and release hemoglobin.
• Chromatography column: Used for separation and elution of glycosylated hemoglobin and non-glycated hemoglobin.
• Filter: Used to initially filter the sample after hemolysis.
• Paper Rolls: Prints a report of the test results.

Performance Parameters

• Linear range: Within the range of 3%-18% of glycosylated hemoglobin, the linear correlation coefficient R value of the test results should not be less than 0.9900.
• Stability Within 8 hours after the analyzer is turned on and stabilized, the same normal sample is tested, and the relative deviation of the test results is not more than ±3.0%.
• Carrying pollution: The carrying pollution rate of the analyzer should not be greater than 2.0%.
• Basic function: Provides Chinese report and abnormal alarm.

Certificated

FAQ

• Is there a capillarys/minicap computer?

A: Yes , we have. The display is a minicap computer.

• Is there a printer?

A: Yes, we have. LD-560 install the built-in printer.

• With electric shock protection system or not?

A: Yes. The instrument has been tested by safety regulations and EMC to meet regulatory requirements.

• The numbers of sample positions ?

A: Ring injection, 20 sample positions.