UP 511S32 KNX Universal Switch Actuator 1xAC 230V 16A with 3 Binary Inputs Flush Mount 5WG1511-2SB32
The KNX universal switch actuator is a compact 1-channel device designed for mounting in appliance boxes according to DIN 49073 or in the M 592/01 mounting case. It provides one relay contact rated at AC 230 V and 16 A, suitable for controlling lighting, heating, or other single-phase loads.
The unit includes three binary inputs for potential-free contacts, allowing direct switching or status monitoring via voltage generated internally. Bus-powered electronics and an integrated bus coupling unit eliminate the need for an external power supply, simplifying installation in confined spaces.
Extensive Functions via Engineering Tool Software
- Status feedback
- Active status signaling
- NO/NC contact selection
- Preferred position on bus failure and recovery
- Cyclical output monitoring
- Switch-on and switch-off delays
- Staircase function
- 8-bit scene control
- Logic operations
- Operating-hours counting
- Forced control
Configurable Input Functions
- Switching
- Dimming
- Colour temperature control
- Solar protection
- Scene control
- Value sending
- Multi-function button operation
Technical Specifications
| Communication Protocol |
KNX |
| Output Relay Contact |
1 output relay contact AC 230 V |
| Rated Contact Current |
16 A |
| Binary Inputs |
3 (for potential-free contacts) |
| Input Poll Voltage |
approx. 5 V |
| Max. Cable Length |
10 m |
| Conductor Cross-Section |
0.5 to 4 mm |
| Power Supply |
Bus-powered |
| Dimensions (W x H x D) |
48 x 50 x 28 mm |
| Warranty |
24 months |
Common Applications
- Flush-mounted KNX room controllers
- Wall-box lighting actuators
- Small residential and hotel room control points
- Concealed automation behind switches